Cosmetics Formulation Development


ช่วยดู loose powder ให้หน่อยครับ

Need help and get help on cosmetics formulation development

Can you help me look at loose powder?

Postby nutthawat24 » Tue Dec 04, 2018 1:25 pm

I want a translucent highlighting powder and control it during the day. I'm not sure how much slippery formula I need to use with a brush. The formula is attached. Where should I increase or decrease? And this recipe is better to order and mix by yourself or hired to produce. I don't have any equipment, but if it's not difficult to mix together, you might try it. thank you very much
Attachments
E6069441-A16F-472D-989B-5A0FD67D3A55.jpeg
สูตรแป้งคุมความมันแบบโปรงแสง
E6069441-A16F-472D-989B-5A0FD67D3A55.jpeg (243.85 KiB) Viewed 737 times
nutthawat24
 
Posts: 2 (Click to watch)
Joined: Mon Jun 09, 2014 3:00 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Help me look at loose powder

Postby staff » Wed Dec 12, 2018 10:10 pm

Hello, the company does not produce powder formulations. I'm very sorry. in this recipe Members must use a blender (example: เครื่องบดผง เครื่องปั่นผง ) The formula needs to be adjusted as follows: Titanium Dioxide and Zinc Oxide ] Zinc Oxide should be reduced. Usually Loose Powder should be used for each use should not exceed 2-3% Nylon-12 use at a very high rate, recommend not more than 5% SelectSorb used at too high a rate. except in the case of a very oily face for normal skin Or normal oily skin, use no more than 3% is enough. Overall, the formula should have Silk Sericite Powder or other starch base, not less than 80%, in which 20% is the addition of texture. (According to other ingredients that members choose) including adding colors
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development