Cosmetics Formulation Development


สอบถามสูตรครีมกันแดด ก่อนสั่งผสมจริงค่ะ

Need help and get help on cosmetics formulation development

Ask about sunscreen recipes. before the actual order.

Postby skeggiold.film » Sun Jun 02, 2019 2:15 pm

skeggiold.film
 
Posts: 87 (Click to watch)
Joined: Sat Jul 12, 2014 7:47 pm
Has thanked: 1 Times
From thanks :: 4 Times
Recipes Count: 0

ask more

Postby skeggiold.film » Tue Jun 04, 2019 2:19 pm

Ask more Sponge Gel you solder oil? If so, how many % can it be soldered?
skeggiold.film
 
Posts: 87 (Click to watch)
Joined: Sat Jul 12, 2014 7:47 pm
Has thanked: 1 Times
From thanks :: 4 Times
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby nid.544595 » Thu Jun 06, 2019 7:29 am

from this product description It's not likely to be a coordinator of water and oil. But it should be the one that helps add viscosity to a single product.
This answer received thanks from: staffskeggiold.film
Click here to convert your point to discount From thanks sent by other members
nid.544595
 
Posts: 129 (Click to watch)
Joined: Tue May 23, 2017 10:07 pm
Has thanked: 59 Times
From thanks :: 12 Times
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby staff » Sun Jun 09, 2019 6:17 pm

Hello, Formula 1 can be mixed. Even without using a binder (cream maker) in the formula. Titanium Dioxide 15nm Liquid , Zinc Oxide 35nm Liquid can you help me coordinate the formula? But the team thinks The formula will be heavier than necessary if you reduce Titanium Dioxide 15nm Liquid , Zinc Oxide 35nm Liquid down to only half of the member rate wish to use The formula is able to give more than 50 SPF easily. Therefore, there should not be a need for a formula level to be larger than the specified size. Because it will make it heavy / gooey and expensive. Formula 2 cannot be mixed. Because there is no binder in the formula. If you want to mix 2 formulas, we recommend you to look at a sample sunscreen formula. chemical sunscreen from the product detail page. SPF Protect Ultra II
Inquire add Sponge Gel can you solder oil or not? Only about not more than 5% if there is more oil. There is a chance of the formula for high-level separation. If not used Emulsifier / other cream maker will help in the recipe.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby skeggiold.film » Sun Jun 09, 2019 6:54 pm

PEG-30 Dipolyhydroxystearate This is also an emulsifier ( Emulsifier ) form Water-in-Oil isn't it, and it should be able to cement the oil at a relatively high rate, right? because I can see that it can be coordinated Cyclomethicone which is ซิลิโคน up to 50%
Attachments
article4_content6.png
อ้างอิงเรื่องการละลายสารกันแดด
article4_content6.png (183.23 KiB) Viewed 3131 times
skeggiold.film
 
Posts: 87 (Click to watch)
Joined: Sat Jul 12, 2014 7:47 pm
Has thanked: 1 Times
From thanks :: 4 Times
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby staff » Sun Jun 09, 2019 8:39 pm

Hello, the team apologizes for checking the formula is highly missing. Yes, we can coordinate. It is advisable to do a stability test sample before mixing large quantities because PEG-30 Dipolyhydroxystearate is commonly used in oil-based formulas such as makeup rather than used in formulas like this. Let members check the solubility rate. BEMT , DHHB and Ethylhexyl Triazone if sufficient solvent is used in the formulation. I can mix it.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby skeggiold.film » Mon Jun 10, 2019 12:11 am

Add Oil-Fix™ to Help with stability, another 1-2% would be appropriate or not?
skeggiold.film
 
Posts: 87 (Click to watch)
Joined: Sat Jul 12, 2014 7:47 pm
Has thanked: 1 Times
From thanks :: 4 Times
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby staff » Fri Jun 14, 2019 3:27 pm

Hello, I can help, but because Oil-Fix looks easily scattered. making use difficult Initially, I recommend you to try the mix first. Then see if there is a problem or not. If there is a problem, then may consider using Oil-Fix can help. But if there is no stability problem, it is not recommended because it will increase the recipe cost and increase the mixing process as well.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby skeggiold.film » Fri Jun 14, 2019 4:27 pm

Thank you very much. Does the company have Dibutyl Adipate for sale? I saw on the web of foreign countries that this substance was dissolved. สารกันแดด Chemical Solvent EHT good at 16% Reference: https://www.carecreations. basf.com/news ... rmulations if not yet available Please consider importing and selling as well. Personally, I think it will be useful to other users as well.
skeggiold.film
 
Posts: 87 (Click to watch)
Joined: Sat Jul 12, 2014 7:47 pm
Has thanked: 1 Times
From thanks :: 4 Times
Recipes Count: 0

Re: Question about sunscreen formula? before the actual order.

Postby staff » Sat Jun 15, 2019 9:47 pm

Hello, no, but usually because EHT is used in The rate is about 1.5-2.0% in the formula, there will be no problem with solubility. because although it is not easy to dissolve But the main ingredients in sunscreen formulas, such as OMC and emollient Various included together, in the formula can be dissolved OMC is close to 2.0%, which is considered a level. already high for EHT from member's formula can increase the rate of use EHT up to 2.0% because both OMC and LipidSoft™ Dry II to help dissolve EHT is enough. The team thank you very much for your advice.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development