Cosmetics Formulation Development


ช่วยตรวจสูตรก่อนทดลองทำให้หน่อนค่ะ

Need help and get help on cosmetics formulation development

Please check the recipe before trying it.

Postby dharmaamm » Wed Jun 19, 2019 3:36 pm

The formula is as follows: water to a hundred. EDTA 0.2% Coffee Extract 3% Tranexamic Acid 3% 4MSK 3% Satin Cream Maker 0.5% Mix together Fractionated Coconut Oil 3% LHA 1% These two use heat. Help dissolve and add MSH White Powder 2% Activated Resorcinol 1% perfect c 5% Tocotrienol 0.5% Milk Thistle 1% mix well and add to the water Stir well and fill. Microcare 1% Please advise if you want is a serum ไวท์เทนนิ่ง Liquid texture, use satin cream 0.5 as much as this enough to combine the meat with quite a lot of oil or not? I have never mixed a serum with a large proportion of oil before. Please advise to adjust the appropriate texture too. It is necessary to use f. Coconut Oil dissolves the oil part? and 3% is enough? The total oil content in this formula Will there be gooey space? How should I adjust the texture to lighten ซิลิโคน ? ซิลิโคน because it's clogged if you use แอลกอฮอล์ please use no more than how many %? Dull skin condition, freckles, dark spots, acne, combination skin. If you see where I should adjust more, please recommend. Thank you very much.
dharmaamm
 
Posts: 310 (Click to watch)
Joined: Thu Jan 14, 2016 4:04 pm
Has thanked: 0 Times
From thanks :: 2 Times
Recipes Count: 0

Re: Please check the recipe before trying to make sprouts.

Postby staff » Sun Jun 23, 2019 8:56 am

Hello, this recipe is not easy to make. The study team suggested that there is a high risk of unsuccessful mixing. The formula has the following problems: 1. Coffee Extract , 4MSK is electrolyte, which makes formulation more difficult. It is recommended to use a cream maker that is more electrolyte resistant Satin Cream Maker 2. LHA , MSH White , Mild Thistle must be dissolved in oil In this case, a test must be made to determine whether the oil in the formulation is sufficient to dissolve or re-dissolve, as well as when heat is required to dissolve these ingredients. Should choose a cream maker that uses heat for brazing as well because a type of cream maker that uses heat for brazing It can help dissolve these ingredients as well. Under the conditions of number 1,2, the team therefore recommends Butter Cream Maker would be ideal for recipes. If you don't want the formula to be too thick, it can be done at a low rate (recommended 2%) and without Gel Maker Any combination Also, the formula will change to look like this. (Members must take the test The team cannot confirm that it will be successful for sure. but expected to be able to) complete a hundred water EDTA 0.2% Coffee Extract 3% Tranexamic Acid 3% 4MSK 3% Microcare 1% oil Fractionated Coconut Oil 3% LHA 1% MSH White Powder 2% Activated Resorcinol 1% perfect c 5% Tocotrienol 0.5% Milk Thistle 1% Butter Cream Maker 2% Mixing Procedure Mix the water parts together , mix the oil parts together by heating 70-80 degrees (except Perfect-C and Tocotrienol extract it as the last step. because it can't withstand heat), then warm the water part. to a temperature similar to that of the oil and while spinning part of the water Gradually add some of the oil. when well coordinated Wait for it to cool down to no more than 40 degrees. Add the rest of the ingredients. blend well Lightening the texture without using ซิลิโคน may be used. emollient Type Light e.g. LipidSoft Dry II including can use Ethyl Alcohol at a low level (should not exceed 5%). Another option is to reduce the ratio of the mixture to some extent. If the formula is too heavy
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development