Cosmetics Products Analysis


Re: สอบภามก่อนสั่งชื้อค่ะ

sharing your analysis of cosmetics products on the market

Re: check before ordering

Postby sisaynoraseng » Sat May 11, 2019 8:18 pm

Hello + Can this formula be used? , If you can use it, please tell the staff how to mix this formula. PS1. I want a cream that is easy to spread, light, absorbs into the skin quickly, helps the skin to retain moisture well and for a long time. does not irritate the skin Focus on nourishing the skin, white and bright. PS 2. Please allow me to tell you the appearance of your skin. Dark skin from sunlight, dry skin, but not peeling, not flaky, not cracked 1. DI Water the rest is 100% 2. Safe-B3 5% 3 . GlucoBright 4% 4. Alpha Arbutin 1 5. Lactic Acid (AHA) 90% Deodorized (odorless) 5% 6. Active Resveratrol 5% 7. Satin Cream Maker 1% 8. Shea Butter (Ultra Soft) 5% 9. Cyclomethicone / Cyclopentasiloxane (Low-Odor) 1% 10. Mild Preserved Eco™ ( Preservative-Free ) 1% Thank you.
sisaynoraseng
 
Posts: 32 (Click to watch)
Joined: Wed Jan 09, 2019 11:26 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: check before ordering

Postby staff » Sun May 12, 2019 8:50 pm

Hello Lactic Acid is highly acidic, using Satin Cream Maker will have recipe synchronization issues. To use Lactic Acid In this formula it is recommended to use Butter Cream Maker would be more appropriate. Active Resveratrol is currently sold as Trans-Resveratrol which is in powder form. high concentration It is recommended to use only 1-2%, other components are not a problem. can mix
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Re: Examine before ordering.

Postby sisaynoraseng » Mon May 13, 2019 8:26 pm

Hello, please disturb the staff. Please inform the process of mixing this recipe in detail. Thank you.
sisaynoraseng
 
Posts: 32 (Click to watch)
Joined: Wed Jan 09, 2019 11:26 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: check before ordering

Postby staff » Sun May 19, 2019 5:32 pm

Hello, please try to learn how to use it. Butter Cream Maker on the product detail page. If you're unsure, try a summary of the steps. Mixing the post on here and the team will check it. that is correct or not
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Re: Examine before ordering.

Postby sisaynoraseng » Sun May 19, 2019 11:01 pm

thank you
sisaynoraseng
 
Posts: 32 (Click to watch)
Joined: Wed Jan 09, 2019 11:26 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: check before ordering

Postby sisaynoraseng » Sat May 25, 2019 10:09 pm

Hello 1. DI Water The rest Complete 100% 2. Safe-B3 5% 3. GlucoBright 4% 4. Alpha Arbutin 1 5. Lactic Acid (AHA) 90% Deodorized (odorless) 5% 6. Trans-Resveratrol 2% 7. Butter Cream Maker 1% 8. Shea Butter (Ultra Soft) 5% 9. Cyclomethicone / Cyclopentasiloxane (Low-Odor) 1% 10. Mild Preserved Eco™ ( Preservative-Free ) 1% + cream blending process is as follows: 1. Heat 7 and 8 at 70 degrees until dissolved, then 1 +2+3 mix well and warm to a temperature close to 70 degrees 2. Add 5+6 to the water, blend or stir until the meat is formed, then add 8, mix well, then add 7, blend or Stir until the cream is formed. 3. Wait for the cream to cool down, not hotter than 40 degrees. Mix 9. Mix well then add 10 and finally 4 into the recipe, blend or stir until dissolved into the recipe. [These remaining ingredients It's ingredients that can't be heated.] Disturbing Staff. We knock and recommend adding more. Thank you.
sisaynoraseng
 
Posts: 32 (Click to watch)
Joined: Wed Jan 09, 2019 11:26 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: check before ordering

Postby staff » Sun Jun 09, 2019 8:45 pm

Hello, the team understands that members choose to use Lactic Acid to act. ผลัดเซลล์ผิว In this formula, the limitation of the function of Lactic Acid means the formula must have a low pH or should not exceed 3.5. This pH level is 3.5. It is also the lowest pH for many ingredients in a formula to be tolerated. This formula therefore needs to be kept at a pH of 3.5, not more or less. because if more than this Lactic Acid will not work effectively. but if lower than this It may cause many ingredients in the recipe to lose quality. Butter Cream Maker Use it at a rate of 2-3%. The rate of 1% is too low.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: check before ordering

Postby sisaynoraseng » Sun Jun 09, 2019 9:22 pm

hello
sisaynoraseng
 
Posts: 32 (Click to watch)
Joined: Wed Jan 09, 2019 11:26 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Please check before ordering.

Postby sisaynoraseng » Sun Jun 23, 2019 11:16 am

Hello PS 1. I want a cream that is easy to spread, absorbs into the skin quickly, does not irritate the skin. Focus on nourishing the skin, white and bright. PS 2. Please allow me to tell you the appearance of your skin. Dark skin from sunlight, dry skin 1. Glycolic Acid (AHA) 100% Powder 5% 2. B3 5% 3. B5 3% 4. Gluco Bright 4% 5. Butter Cream Maker 2% 6. Cyclomethicone / Cyclopentasiloxane (Low-Odor) 1% 7. Mild Preserved Eco™ ( Preservative-Free ) 1% 8. DI Water The rest is 100% + Can this formula work? + Please suggest the mixing process, thank you.
sisaynoraseng
 
Posts: 32 (Click to watch)
Joined: Wed Jan 09, 2019 11:26 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: check before ordering

Postby sisaynoraseng » Sun Jun 23, 2019 4:47 pm

Is there a way to adjust the PH value? When the PH value in the formula is high PH value, or the PH value is too low?
sisaynoraseng
 
Posts: 32 (Click to watch)
Joined: Wed Jan 09, 2019 11:26 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Next

Return to Cosmetics Products Analysis