Cosmetics Formulation Development


สอบถามการละลายของ Retinal

Need help and get help on cosmetics formulation development

Retinal Dissolution Inquiry

Postby officialpon » Mon Mar 25, 2019 1:08 pm

Objective I want to use oil as a solvent as little as possible. Type 1 0.05% Retinal 5% Squalane Type 2 0.05% Retinal 5% LipidSoft™ F (Ethyl Linoleate) Question 1) Can it be heated and dissolved in Squalane ? Yes 2) If yes, can you reduce the % to 3%? 3) Can you dissolve the second type? 4) Squalane with LipidSoft™ F (Ethyl Linoleate) which one has a lighter touch 5) Recommend a substance that makes it slippery. For a light gel serum
officialpon
 
Posts: 44 (Click to watch)
Joined: Sun Nov 15, 2015 6:31 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Inquire about Retinal Dissolution

Postby staff » Sun Mar 31, 2019 2:12 pm

Hello, it can be used for both 3% and 5%, but there is an additional condition that the emulisifier or cream maker used should be used as a hot process only, which may add Retinal into the last step When the cream is set And the temperature is about 40 degrees, then blend well, but it is not suitable for the recipe that uses a cold-process cream maker because the hot process cream maker can help melt. Retinal with cream too.
4) Squalane with LipidSoft™ F (Ethyl Linoleate) which is lighter?
Squalane ] Squalane
5) Can you recommend a substance that makes it slippery? For a light gel serum
recommend Silicone Gel ] Silicone Gel (Ultra Clear) 3-5%
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development