Cosmetics Formulation Development


แป้งพัฟผสมรองพื้น

Need help and get help on cosmetics formulation development

Foundation puff powder

Postby yupaporn.kaewkam » Mon Apr 01, 2019 11:25 am

Example of formula foundation (pressed powder) (Oil Thick™ serves to create the formula. to a suitable thickness in order to coagulate into pressed powder) 1. Oil Thick™ Hard 8% 2. LipidSoft™ Lite 12% 3. Microcrystalline Wax 4% 4. Isododecane 20% 5. isohexadecane 22% 6. MatteSilica 5% 7. Beige Iron Oxides EasyMix™ 2% 8. Silk Talc Powder 27% Step: Mix 2+4+5+6+7+8 well, the paint is evenly distributed throughout the recipe, then add 1 and 3 by heating 80-90C. until homogeneous, turn off the heat, stir or blend at low speed until the formula cools and sets. I have followed this recipe. When should I compress? This set is still liquid. Compress it or wait for it to harden. Crush it and compress it. or what to do, please advise
yupaporn.kaewkam
 
Posts: 4 (Click to watch)
Joined: Wed Oct 04, 2017 4:01 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Powder puff with foundation

Postby staff » Sun Apr 07, 2019 1:16 am

Hello, the formula is as the member has informed. When you leave it for 3-6 hours, it should be set to a thick cream foundation rather than a thick cream foundation. This formula is not for pressed powder. In the event that members will make pressed dough Finish mixing the powder ingredients (starch base e.g. Silk Talc Powder , Silk Sericite Powder with colors such as beige Beige Iron Oxides EasyMix , White Iron Oxides EasyMix ) When you get the desired texture, add a binder such as Dimethicone not too liquid and not too thick recommended Dimethicone (Light/100 , Low-Odor) rate about 6-8% of the formula. When adding, gently sprinkle or spray onto the surface of the powder. Then blended to spread all over the dough. and can compress it If you don't like silicone, use LipidSoft that can be blended as a binder, for example LipidSoft Palm , LipidSoft Spread (Binder type selected will also affect the texture of the formula. Therefore, it is advisable to try several designs.)
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Powder puff with foundation

Postby yupaporn.kaewkam » Wed Jun 12, 2019 12:18 pm

Thank you, but I need more coverage and waterproofing. because of the recommended formula Not very concealable and waterproof.
yupaporn.kaewkam
 
Posts: 4 (Click to watch)
Joined: Wed Oct 04, 2017 4:01 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Powder puff with foundation

Postby staff » Fri Jun 14, 2019 5:17 pm

Hello, preliminary introduction: 1. Adding wax will increase sun protection. by possibly increasing the proportion of Microcrystalline Wax or use another wax like Polyethylene Wax / Titanium Dioxide 200nm EasyDisperse™ Polyethylene Wax (Soft) Titanium Dioxide 200nm EasyDisperse™ starting at 5% (in combination with Article 1 of which item 1 will also help with concealment. Because it allows the powder that can cover the skin. better on the skin)
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development