Cosmetics Formulation Development


สอบถามค่ะ หากต้องการเติมน้ำมันเข้าไปในสูตรที่มีส่วนผสมดังนี้

Need help and get help on cosmetics formulation development

Ask if you want to add oil into the formula with the following ingredients.

Postby thelittledraco » Fri Dec 13, 2019 8:39 am

To add oil to the formula with the following ingredients: Water , Dipropylene glycol , Dimethicone , Pentaerythrityl tetraethylhexanoate , Alcohol , Butylene Glycol , Glycerin , Trehalose , Potassium Methoxysalicylate , Behenyl Alcohol , Phenoxyethanol , Batyl Alcohol , Carbomer , Potassium Hydroxide , Peg/ppg-14/7 dimethyl ether , Xanthan Gum , Isostearic acid , Disodium EDTA , parfum , Lauryl Betaine , Ascorbyl Tetraisopalmitate , Betaine , Magnesium Ascorbyl Phosphate , Tocopheryl Acetate , Acrylates/c10-30 alkyl acrylate crosspolymer , Sodium Metabisulfite , Magnesium chloride , Lilium candidum bulb extract , Olea Europaea (olive) leaf extract , Calcium chloride , sodium benzoate , Hydrolyzed conchiolin protein can Add oil that has already dissolved other ingredients into the recipe or have to add more water and oil compounds. If you have to add, which substance should be and how many % of usage? Thank you in advance
thelittledraco
 
Posts: 118 (Click to watch)
Joined: Sat Jan 21, 2017 3:21 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Ask if you want to add oil into the formula with the same ingredients.

Postby staff » Sun Dec 15, 2019 9:30 pm

Hello, what kind of oil do you want to fill? what is oil And the rate that you want to add, how many % of the formula?
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Ask if you want to add oil into the formula with the same ingredients.

Postby thelittledraco » Thu Dec 19, 2019 6:24 pm

intend to use น้ำมันธรรมชาติ could be อัลมอนด์ออยล์ %Using, please suggest me. To use to dissolve MSH White Absorb can be used in formulas without stratification or precipitation.
thelittledraco
 
Posts: 118 (Click to watch)
Joined: Sat Jan 21, 2017 3:21 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Ask if you want to add oil into the formula with the same ingredients.

Postby staff » Sun Dec 22, 2019 1:00 am

Hello
I intend to use น้ำมันธรรมชาติ could be almond oil. %Using, please suggest
you can fill it. but may not be in large quantities because in the formula there should be a proportion of Oil + silicone enough, 3% test should have no problem. but more than may be at risk of separating
If you want to use it to melt MSH White Absorb can be used in formulas without stratification or settling
do not need to use Almond Oil has come to help dissolve. This formula contains both oil and Ethyl Alcohol is already in the formula, add MSH White Absorb and blend well. If any sediment is found after spinning It may be warmed a little 50-60 degrees and then spin again to be able to melt. MSH White Absorb until it's gone.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Ask if you want to add oil into the formula with the same ingredients.

Postby thelittledraco » Tue Dec 31, 2019 1:33 pm

From this formula, if adding Vitamin C (L-ascorbic acid) (Ultra-Fine) into the meat A Sense of performance วิตามินซี will it deteriorate quickly? Or should I mix separately each time I use it? if you can fill There should be other substances added to maintain its effectiveness. วิตซี ?
thelittledraco
 
Posts: 118 (Click to watch)
Joined: Sat Jan 21, 2017 3:21 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Ask if you want to add oil into the formula with the same ingredients.

Postby staff » Tue Dec 31, 2019 3:44 pm

Hello, you can't add it. You can use it separately.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Ask if you want to add oil into the formula with the same ingredients.

Postby thelittledraco » Thu Jan 02, 2020 8:48 am

Is it because there are ingredients that should not be used at the same time or why? Thanks in advance.
thelittledraco
 
Posts: 118 (Click to watch)
Joined: Sat Jan 21, 2017 3:21 pm
Has thanked: 1 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Ask if you want to add oil into the formula with the same ingredients.

Postby staff » Mon Jan 06, 2020 10:36 pm

Hello, I have copied the usage restrictions from the ingredient details page.
Vitamin C type L-ascorbic acid It should not be directly mixed with water. due to oxidation and deterioration (To mix with water directly Should be used within 3 days) used to mix in cosmetics. If water is included, it should be added Ferulic Acid and Vitamin E to reduce oxidation (adding Ferulic Acid and Vitamin E to reduce oxidation is copyright of SkinCeuticals Please click to see how) or add Glutathione (L-Reduced type) to reduce oxidation causing L-ascorbic acid No loss
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development

cron