Hello
Using
Titanium Dioxide 15nm Liquid (Gloss) In the formula, the formula must be a system emulsion
Water-in-Oil only, which means that in case of use in this formula, the formula must be adjusted as follows:
Avobenzone 3%
Oxybenzone 6%
ActiveProtec™ 1-2%
LipidSoft™ Matte 10%
Phenoxyethanol 0.5%
Disodium EDTA 0.5%
Titanium Dioxide 15nm Liquid (Gloss) Warp Cream Maker 10% water remaining by blending the oil parts together. Then gradually add part of the water. into the oil that is continuously spinning
To remove
OMC has been issued and used lipmat instead. Can this be done? If so, how many % should I add and which substance should be added to withstand the spf to complete the spf50PA++++
Members should mean using
LipidSoft Matte Melt
DHHB instead of
OMC can, but the solubility rate is lower than using
OMC in which case use
LipidSoft Matte Members will have to test to see how much the usage rate needs to be increased. to be able to dissolve
DHHB (to verify that complete dissolution Sometimes this cannot be done with the naked eye. Must use a binocular)
1 Using
Titanium Dioxide 15nm Liquid 25%
Zinc Oxide 35nm Liquid 15% - In the formula without any other
สารกันแดด . Two extracts and this % SPF can be used How much do you get? - If it's higher than 50 How many % should be adjusted for each person to be enough to claim that SPF50 - and PA from these two extracts and this %? How much PA can you claim? If you want to have 4+ PA++++ or more, the staff recommends which extracts to add to the formula to add +PA, easy to use, not difficult to mix, not high price
from this formula, it is expected that the value SPF more than 50 and PA+++, but the actual value must be measured in the lab. The company itself offers free SPF measurements for selected formulas.
สารกันแดด of the company. If you want to send a sample to measure You can ask how to send the sample to customer relations
care@myskinrecipes.com