Cosmetics Formulation Development


เช็คขั้นตอนและวิธีผสม

Need help and get help on cosmetics formulation development

Check the process and how to mix.

Postby popwdream » Sat Jul 24, 2021 10:28 am

gamma Oryzanol (Rice Bran Extract) 0.5% Mineral Oil (Paraffinum Liquidum) ชนิดเบา Very 5% Disodium EDTA 0.2% Natural Moisturizing Amino Acids 4% Butylene Glycol 15% Mild Preserved Eco 1% น้ำกลั่น Remaining Phospholipid 2% Warp Cream Maker™ 7% Phenylethyl Resorcinol 0.5% ActiveProtec™ OX 0.6% Mixing method Mix oil first, then mix with water, then add water to oil, then add Phospholipid and Warp Cream Maker™ until homogeneous, then add Phenylethyl Resorcinol and ActiveProtec™ OX Blend together, finally add Mild Preserved Eco Blend together I don't know if the mixing process is correct or not. Need a cream that helps with moisture and white skin.
popwdream
 
Posts: 42 (Click to watch)
Joined: Mon Jan 04, 2021 4:27 am
Has thanked: 2 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Check the process and how to mix

Postby staff » Sun Aug 01, 2021 12:13 pm

Hello, the formula is not suitable. Reason to use Butylene Glycol to 15% due to what?
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Check the process and how to mix

Postby popwdream » Mon Aug 02, 2021 9:15 am

If adjusting appropriately, where should I adjust? Reduce Butylene Glycol left 5%, would the formula be appropriate?
popwdream
 
Posts: 42 (Click to watch)
Joined: Mon Jan 04, 2021 4:27 am
Has thanked: 2 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Check the process and how to mix

Postby popwdream » Wed Aug 04, 2021 8:38 pm

If Butylene Glycol left 5%, will the cream come out white? If not, where do I need to fix it?
popwdream
 
Posts: 42 (Click to watch)
Joined: Mon Jan 04, 2021 4:27 am
Has thanked: 2 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Check the process and how to mix

Postby staff » Thu Aug 12, 2021 7:43 pm

Hello. As for gamma oil Oryzanol (Rice Bran Extract) 0.5% Mineral Oil (Paraffinum Liquidum) ชนิดเบา Very 5% Phospholipid 2% Warp Cream Maker™ 7% Phenylethyl Resorcinol 0.5% water part Disodium EDTA 0.2% Natural Moisturizing Amino Acids 4% Butylene Glycol 5% Mild Preserved Eco 1% ActiveProtec™ OX 0.6% น้ำกลั่น , the rest warm up the oil portion. blend well Mix the parts of the water together. while the oil is continuously spinning Gradually add the water until it's gone. white cream not about use Butylene Glycol in large-low-or not.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Check the process and how to mix

Postby popwdream » Mon Aug 16, 2021 6:59 am

You can use Light Cream Maker 1% instead of Warp Cream Maker™ 7%?
popwdream
 
Posts: 42 (Click to watch)
Joined: Mon Jan 04, 2021 4:27 am
Has thanked: 2 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Check the process and how to mix

Postby staff » Sat Aug 21, 2021 10:13 pm

Hello, this recipe can use Light Cream Maker can be replaced. But there must be a helper to stabilized in case of choosing Light Cream Maker recommend ratio as follows. Light Cream Maker 1.5% Xanthan Gum 0.5% or ClayThick 0.5%
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development