Cosmetics Formulation Development

-----Formula 1 whitening Cream------ Phase A (Water) CosmoWhite™ (1-Methylhydantoin-2-Imide) 1% Z-White™ 1% Water 75.4% Disodium EDTA 0.1% Phase B (Glycol) Ethoxydiglycol 3% Propylene Glycol 3% L-Carnosine 1% Phase C (Oil) Fractionated Coconut Oil 10% MSH White™ ( Undecylenoyl phenylalanine ) 1%, spin at 80 degrees, wait until cool and add. PalGLY (Palmitoyl Glycine) 1% Natural Bisabolol 1% Light Cream Maker™ 1.5% Blend until homogeneous A+B+C Blend until homogeneous then add. Mild Preserved Eco™ ( Preservative-Free ) 1% and blend until dissolved ----- Formula 2 BHA Gel----- Phase A (Water) Aloe Vera Extract (อัตราสกัด 10:1 FullAssay™) 1% Pro Polymer™ (Gel Maker) 0.8% Water 68.6% Disodium EDTA 0.1% Phenoxyethanol (Extra Pure)0.5% Phase B (Glycol) Propylene Glycol 5% Isopentyldiol 12% Salicylic Acid ( BHA ) 3% Glycerin 99.5% 3% Phase C (Oil) Fractionated Coconut Oil 5% A+B+C blend until homogeneous, adjust pH with Triethanolamine 99% until pH 3.5 ----- Formula 3 Body Lotion---- -- Phase A (Water) Glycerin 99.5% 3% Water 77.4% Disodium EDTA 0.1% Ethoxydiglycol 3% Safe-B3 ™ ( Vitamin B3, Niacinamide ) 5% GlucoBright™ ( Acetyl glucosamine ) 4% Phenoxyethanol (Extra Pure)0.5% Phase B (Oil) Fractionated Coconut Oil 10% Light Cream Maker™ 1% Blend until homogeneous A+B Blend until homogeneous thank you very much

Hello,

Phase A (Water) CosmoWhite™ (1-Methylhydantoin-2-Imide) 1% Z-White™ 1% Water 75.4% Disodium EDTA 0.1% Phase B (Glycol) Ethoxydiglycol 3% Propylene Glycol 3% L-Carnosine 1% Phase C ( Oil) Fractionated Coconut Oil 10% MSH White™ ( Undecylenoyl phenylalanine ) 1%, spin at 80 degrees, wait until cool and add. PalGLY (Palmitoyl Glycine) 1% Natural Bisabolol 1% Light Cream Maker™ 1.5% Blend until homogeneous A+B+C Blend until homogeneous then add. Mild Preserved Eco™ ( Preservative-Free ) 1% and blend until dissolved

The formula can be mixed but Z-White may cause the cream to melt. if too liquid consider increasing the proportion of Light Cream Maker 1.7-2.0% Yes

-----Formula 2 BHA Gel----- Phase A (Water) Aloe Vera Extract (อัตราสกัด 10:1 FullAssay™) 1% Pro Polymer™ (Gel Maker) 0.8% Water 68.6% Disodium EDTA 0.1% Phenoxyethanol (Extra Pure)0.5% Phase B (Glycol) Propylene Glycol 5% Isopentyldiol 12% Salicylic Acid ( BHA ) 3% Glycerin 99.5% 3% Phase C (Oil) Fractionated Coconut Oil 5% A+B+C blend until homogeneous, adjust pH with Triethanolamine 99% until pH 3.5[ /quote] This formula will crash. Salicylic Acid will not dissolve in formulas. because there is a part of water must be used as Complex Salicylic Acid soluble instead [quote: 5xsyxctn]-----Formula 3 Body Lotion------ Phase A (Water) Glycerin 99.5% 3% Water 77.4% Disodium EDTA 0.1% Ethoxydiglycol 3% Safe-B3 ™ ( Vitamin B3, Niacinamide ) 5% GlucoBright™ ( Acetyl glucosamine ) 4% Phenoxyethanol (Extra Pure)0.5% Phase B (Oil) Fractionated Coconut Oil 10% Light Cream Maker™ 1% blended until homogeneous A+B blended until homogeneous

The formula can be mixed. If the meat is liquid can adjust the proportion of Light Cream Maker can be added in all 3 recommended recipes. Choose สารกันเสีย to Mild Preserved Eco 1% is more gentle on the skin than Phenoxyethanol

BHA Gel This one brings Salicylic Acid ( BHA ) 3% normal type to dissolve in Isopentyldiol 12% before can not help the formula dissolve. Can I have water? -Then please add a little bit Silk Lotion Maker can be soldered in formulations with water+ ซิลิโคน ( Cyclomethicone ) or water+ ซิลิโคน ( Cyclomethicone )+oil( LipidSoft™ ) or not if you do not use the SiliSolve Plus™ ( Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone , Odorless) what texture will it have? - Finally, those formulas are mixtures. Water-in-Oil / oil-in-water can be mixed. using Overhead stirrer crescent instead of Homogenizer , thank you. PS. Sorry for asking. a lot just about to order will be able to order at once

Hello

- BHA This Gel brings Salicylic Acid ( BHA ) 3% normal type to dissolve in Isopentyldiol 12% before can not help the formula dissolve. Can it be water?

Salicylic Acid is soluble. good in Isopentyldiol but after mixed with the water (or the water-based main part) will cause precipitation because Salicylic Acid insoluble in water

- so please add a little bit Silk Lotion Maker can be soldered in formulations containing water+ ซิลิโคน ( Cyclomethicone ) or water+ ซิลิโคน ( Cyclomethicone )+Oil( LipidSoft™ ) or not? SiliSolve Plus™ ( Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone , Odorless) What texture will it have?

can be done, but the proportion of oil+silicone Not too high. If it's more than 15%, you will start to risk separation. And will separate when more than 20% in. also need a helper such as ClayThick , Xanthan Gum help stabilize the formula

-lastly, those formulas are mixtures. Water-in-Oil / oil-in-water can be mixed. using Overhead stirrer crescent instead of Homogenizer , thank you

All can be blended with Overhead stirrer , but only the stirrer must be selected as the disperser. Use a different shape of the blender head. Because there is no stirring force for emulsion to blend together well.