Cosmetics Formulation Development


ปัญหาที่เกิดจากการสร้างเนื้อครีมจาก warp cream maker

Need help and get help on cosmetics formulation development

Problems caused by the creation of cream from the warp cream maker

Postby unchanee1 » Sat Sep 23, 2017 10:55 am

There was a problem creating the cream from Warp Cream Maker . It's not creamy at all. I have followed the steps as shown in the example on the web page. Any proportion is an example. Cyclomethicone 45% Silicone Gel 5% Warp Cream Maker 7% water and water-soluble ingredients สารกันเสีย 1% How to get the creamy texture Thick like a cream jar.
unchanee1
 
Posts: 4 (Click to watch)
Joined: Wed Sep 07, 2016 3:13 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Problem caused by creating cream from warp cream maker

Postby staff » Wed Sep 27, 2017 12:29 am

Hello, the team is disturbed to ask for information as follows. 1. The steps that the members make in detail. 2. The tools used to blend the formula. including the spinning head [If there is a spinning image It will help the team to analyze the problem very well.]
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Problem caused by creating cream from warp cream maker

Postby unchanee1 » Fri Sep 29, 2017 1:58 pm

The formula will be a sample formula from the web page. A=Bring Cyclomethicone + Silicone Gel + Warp Cream Maker and blend until homogeneous. B=take part of the water (it is clean water only I haven't added any active ingredients yet) mix well. C=During the blending, A gradually added B into A little by little when it blended well. Keep adding B until you can fill it up completely. * Blender used Overhead stirrer 150/90 watts *The blender is used Dissolver/Disperse size 3 cm. It's liquid like water. leave it for 1 night There is a separate layer of water and cream too.
unchanee1
 
Posts: 4 (Click to watch)
Joined: Wed Sep 07, 2016 3:13 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Problem caused by creating cream from warp cream maker

Postby touchzhakornxx » Sun Oct 01, 2017 9:48 pm

The amount of water may be too much or not, try adding actives or other substances to reduce the amount of water in the recipe. I usually use it to make sunscreen. The amount of water in the formula is about 16%. It can create a good creamy texture. What's wrong with trying to wait for the team to check it out?
This answer received thanks from: staff
Click here to convert your point to discount From thanks sent by other members
touchzhakornxx
 
Posts: 163 (Click to watch)
Joined: Sat Sep 13, 2014 1:32 pm
Has thanked: 2 Times
From thanks :: 118 Times
Recipes Count: 0

Re: Problem caused by creating cream from warp cream maker

Postby staff » Tue Oct 03, 2017 2:56 am

Hello, the team learns to ask the members. It was found that there was a stratification. When adding more and more water Is this correct? If correct, please reduce the proportion of water. by replacing with Cyclomethicone or Silicone Gel As advised by touchzhakornxx, try to keep the water part out. more than 40% of the formula
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development