Cosmetics Products Analysis


ขอคำแนะนำ และวิเคราะห์สูตรกันแดดค่ะ

sharing your analysis of cosmetics products on the market

Please advise and analyze the sunscreen formula.

Postby socutegirl61 » Thu Apr 19, 2018 9:12 pm

The formula I asked :D Pro Polymer 1.5 % Water 60 % 2Na- EDTA 0.1 % TiO2 12 % Cyclomethicone 10 % SiliSolve Plus 1 % LipidSoft Lite 5 % Avobenzone 3 % Octocrylene 6 % Phenoxyethanol 1% Questions are as follows: 1. Components and % selected. Use are appropriate. Is it compatible or not? 2. There is 60 % water left like this. Will the meat be too liquid? 3. The procedure, try to study from the product information and recommended by all staff. You can get it like this. 3.1 Prepare gel base - Sprinkle the powder into water and stir for 3-5 minutes until you get a smooth gel texture. - Add 2Na- EDTA , stir until completely dissolved. 3.2 Heat TiO2 at 70 degrees, pour into prepared gel base. Blend until dispersed 3.3 Mix Cyclomethicone , Silicone Gel and LipidSoft Lite is also included. set aside, then heated to 70-80 degrees. 3.4 Add Octocrylene Avobenzone at 70-80 degrees people to enter. together, separated into parts Silicone 3.4 Then mix part 3.2 with the prepared part 3.3. Poor people get viscosity 3.5. At 40 degrees, add Madecassoside -80 powder and Phenoxyethanol SA Blend well. Is the procedure correct? Where do I have to adjust and if I want to adjust the viscosity (with 60% water, I'm worried that it's going to run out) can be increased or decreased. Silicone Gel or add % of Pro Polymer which one is more suitable) 4. สารกันแดด in the formula. Go calculate on the website that the staff recommended. You get SPF 35 and PA+++. Thank you very much ^^
socutegirl61
 
Posts: 6 (Click to watch)
Joined: Sun Jan 07, 2018 7:51 pm
Has thanked: 7 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Advice and analysis of sunscreen formula

Postby socutegirl61 » Sat Apr 21, 2018 12:03 am

More permissions The purpose of this sunscreen formula. Want a sunscreen that mixes both Physical+Chemical For increased UV protection, reduced luster and good texture. (Not sticky) by using the formula recommended from this forum. and raw material information Which parts need to be improved, please advise. thank you very much
socutegirl61
 
Posts: 6 (Click to watch)
Joined: Sun Jan 07, 2018 7:51 pm
Has thanked: 7 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Advice and analysis of sunscreen formula

Postby staff » Sat Apr 28, 2018 10:32 pm

Hello, what type of TiO2 do you use?
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Advice and analysis of sunscreen formula

Postby socutegirl61 » Fri May 04, 2018 8:41 pm

In the formula, choose the TiO 15 nm. liquid.
socutegirl61
 
Posts: 6 (Click to watch)
Joined: Sun Jan 07, 2018 7:51 pm
Has thanked: 7 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Advice and analysis of sunscreen formula

Postby staff » Fri May 11, 2018 8:19 pm

Hello, the formula has the following problem: 1. Avobenzone can't melt at all. because there is no solvent in the formula Avobenzone enough to introduce you. members try to check detailed information Avobenzone on the website. 2. SiliSolve Plus is not needed in this formula because Titanium Dioxide 15nm Liquid and Pro Polymer will help coordinate the formulation to be stable now by Pro Polymer at a rate of 1.5% is too high, recommend 0.5 % That's enough. Sunscreen formula. It should not be too thick. will make it difficult to blend not convenient to use The mixing process is to use Titanium Dioxide 15nm Liquid is dissolved. with part of all oil Using a heat of 70-80 degrees, blend well. Then gradually add part of the water. into the oil Blend until well blended to get a creamy texture, then add Pro Polymer blended to form a gel. to thicken the meat to the desired level (Or if you want a little liquid Try the recipe without Pro Polymer )
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Products Analysis