Cosmetics Products Analysis


สเปรย์ฉีดหน้า สดชื่น ลดความมัน

sharing your analysis of cosmetics products on the market

Facial spray, refreshing, reduces oiliness

Postby j.tasuta » Wed Jul 18, 2018 10:16 am

Feel free to ask questions about the recipe. That this formula can do it? Water phase 97.400% 1 water 40.20% 2 Allantoin 0.50% 3 Sebum-Reg™ (Capryloyl Glycine) 1.0 % 4 Panthenol (Pro Vitamin B5) 2.00% 5 Safe-B3 ™ ( Vitamin B3, Niacinamide ) 3.00% 6 N-Acetyl-D Glucosamine ( GlucoBright™) 3.00% 7 Disodium EDTA 0.20% 8 Pure MSM™ 3.0% 9 Rice Vitamin 2.0% 11 Double Hyaluron Liquid 1.00% 12 Ethoxydiglycol 2.00% 13 Phenoxyethanol SA (Optiphen Plus) 0.50% 14 Galactomyces Ferment Filtrate (Pitera) 5.00% 15 Rose Water (Rosa Damascena) 20.0% 16 Witch Hazel (Distilled - Alcohol Free) 10.0% 17 WaterSoft™ 2.0% 18 Hi-EGCG™ (Green Tea Extract) 2.0% Lipid phase 2.60% 1 Flora Solve™ Clear 2.00% 2 CoolTouch™ 0.50% 3 Peppermint Oil 0.10% Please inquire 1. Sebum-Reg™ is it hard to melt? In the information it is said that The solubility increases when CoolTouch >70 degree and pH>7 should be heated and put it first or not? CoolTouch dissolved in oil, alcohol or glycol, if you follow this recipe, you must enter Butylene Glycol to dissolve CoolTouch before adding to Is it a formula? or you can use CoolTouch and Peppermint Oil mixed with Flora Solve Clear and add it to the watery part. 3. Adding flavor can be mixed Peppermint Oil Flora Solve Clear and add it to the formula? thank you very much
j.tasuta
 
Posts: 10 (Click to watch)
Joined: Thu Jun 14, 2018 11:15 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Fresh face spray, reduce oiliness

Postby staff » Thu Jul 19, 2018 9:13 pm

Hello Allantoin can be dissolved to a maximum, not more than 0.5% of the water in the formula. In this case, it must be reduced Allantoin about 0.2-0.25% left
Lipid phase 2.60% 1 Flora Solve™ Clear 2.00% 2 CoolTouch™ 0.50% 3 Peppermint Oil 0.10%
The team did not. sure of the rate of use Flora Solve Clear 2.0% will be enough? In the coordination of all oils with water, if you mix and find that clouding When added to water, adjust Flora Solve Clear or downgrade CoolTouch and Peppermint Oil down Flora Solve Clear will help dissolve CoolTouch can also be given. No need to use Glycol or Alcohol again
1. Sebum-Reg™ is it difficult to dissolve? In the information it is said that The solubility increases when Temp>70 degrees and pH>7 should heat and put it first?
If you are a new member. It is advisable to cut it out of the recipe first. but if you want to try Try warming the water at 70-80 degrees, then bring Sebum-Reg™ added to dissolve it, if found not dissolved, add Panthenol to help adjust the pH of the formula higher because Panthenol itself has a rather high pH value.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Fresh face spray, reduce oiliness

Postby j.tasuta » Sun Jul 22, 2018 12:17 pm

thank you very much I'll let you know how it works.
j.tasuta
 
Posts: 10 (Click to watch)
Joined: Thu Jun 14, 2018 11:15 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Fresh face spray, reduce oiliness

Postby j.tasuta » Wed Jul 25, 2018 1:30 am

After experimenting with the formula, it was found that 1. heat น้ำกลั่น about 70 degrees, then add Allantoin 0.2 % until it dissolves completely, then add Sebum-Reg™ (Capryloyl Glycine) 1% completely dissolved, got solution. milky white After leaving to cool, the crystals of Sebum-Reg™ isolated from solution (try to heat again, let cool and crystallize again) solution: use Butylene Glycol is a solvent. Solubility test can be used Butylene Glycol 3% Melt Sebum-Reg™ (Capryloyl Glycine) 2% using heat about 60 - 70 degrees, completely dissolved, clear solution Leave to cool, do not crystallize. 2. Lipid phase: Flora Solve™ Clear 2.00% Solvent CoolTouch™ 0.50% and Peppermint Oil 0.10% got it all, got clear solution, adjust formula Water phase 97.40% 1 water 45.50% 2 Allantoin 0.20% 3 Sebum-Reg™ (Capryloyl Glycine) 2.0% (increase from 1% to 2% dissolved in Butylene Glycol ) 4 Panthenol (Pro Vitamin B5) 2.00% 5 Safe-B3 ™ ( Vitamin B3, Niacinamide ) 3.00% 6 N-Acetyl-D Glucosamine ( GlucoBright™) 3.00% 7 Disodium EDTA 0.20% 8 Pure MSM™ 3.0% 9 Rice Vitamin 2.0% 11 Double Hyaluron Liquid 1.00% 12 Ethoxydiglycol 2.00% 13 Phenoxyethanol SA (Optiphen Plus) 0.50% 14 Galactomyces Ferment Filtrate (Pitera) 5.00% 15 Rose Water (Rosa Damascena) 10.0% 16 Witch Hazel (Distilled - Alcohol Free) 10.0% 17 WaterSoft™ 2.0% 18 Hi-EGCG™ (Green Tea Extract) 2.0% 19 Butylene Glycol 3.0% Lipid phase 2.60% 1 Flora Solve™ Clear 2.00% 2 CoolTouch™ 0.50% 3 Peppermint Oil 0.10% after the all equations Good solubility, no sediment, no crystallization, no stratification Color: clear solution Color น้ำตาลอ่อน (brown from Hi-EGCG™ (Green Tea Extract) ) Smell: Rose fragrance. Peppermint (mint candy release) Feeling after spray: - Slightly sticky, dries in 3 minutes - Cooling sensation starts in about 1 minute, cools off in 15 minutes Things to adjust: - Slightly sticky after spraying (Which one should be reduced?) Thank you for your advice.
j.tasuta
 
Posts: 10 (Click to watch)
Joined: Thu Jun 14, 2018 11:15 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Fresh face spray, reduce oiliness

Postby staff » Sun Aug 05, 2018 11:20 am

Hello, I would like to introduce as follows: Remove ingredients: 4,9,11,18 from the recipe Reduce ingredients: 5 to 1%, 6 to 1%, 8 to 1% Reducing and eliminating these active ingredients will help reduce the stickiness. of the recipe is good
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Products Analysis

cron