Cosmetics Products Analysis


ชี้แนะหน่อยครับ

sharing your analysis of cosmetics products on the market

Please advise

Postby panithir » Wed Aug 15, 2018 2:08 pm

I use one product and I like it very much. Find out that the recipe contains Water, Butylene Glycol , Sodium Ascorbyl Phosphate, Magnesium Ascorbyl Phosphate , Sodium Hyaluronate , Citric Acid , Phenoxyethanol , Lactic Acid , Sodium Hydroxide , Scutellaria Baicalensis Root Extract, Dipotassium Glycyrrhizate , Xanthan Gum . This product uses Sodium Ascorbyl Phosphate (SAP) and Magnesium Ascorbyl Phosphate (MAP) two for 20%. I ordered these two to test and they dissolved completely but after leaving it for a while. found that precipitation What advice do the admins have? Thank you.
panithir
 
Posts: 4 (Click to watch)
Joined: Mon Oct 02, 2017 2:23 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Suggestions please

Postby staff » Thu Aug 16, 2018 1:42 am

Hello, the above product should be using Sodium Ascorbyl Phosphate at 5% and Magnesium Ascorbyl Phosphate 10% (not 10%,10%) This rate should not be a problem of sedimentation. I recommend you to test 5%/10%.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Suggestions please

Postby panithir » Thu Aug 16, 2018 2:28 pm

I tried to follow it by adding Citric Acid 1% and adjust the pH to about 7. It turns out that There is sediment.
panithir
 
Posts: 4 (Click to watch)
Joined: Mon Oct 02, 2017 2:23 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0


Return to Cosmetics Products Analysis