Hello, this formula has the following problems: 1. Oil group (items 6,7) and hydrocarbon group (1,2) are used, which may not be compatible with each other very well. If there is no synchronization will be a problem There are two solutions here: (a) omit entries 6,7 and replace them with 1,2 (add more 1,2) or (b) use a binder. In this case, suggest
SiliSolve Plus 1-2% nah 2 The team is not sure what kind of Pigment 20% this is. And is involved in the separation or not. However, the problem is obvious. is more of a problem in the first point. Therefore, it is recommended to try to fix the first point first for the mixing process. Warm and blend all together except item number 4. Wait for the formula to cool down a bit, then add and blend quickly to combine. and packing Do not leave it in the air because it will evaporate from the formula. For formulas that already have stratification problems If there is quite a lot of production Suggest to edit by adding
SiliSolve Plus 2% Blend well (minimum 1000rpm and use Disperser only)