Cosmetics Formulation Development


เนื้อครีมเหนียวเหนอะหนะ

Need help and get help on cosmetics formulation development

Creamy, gooey texture.

Postby sujitra.ta » Thu Nov 01, 2018 12:45 am

Make a face cream ไวท์เทนนิ่ง Creamy, gooey texture. Apply and feel it Not sure which step went wrong. Or is it dissolved in the wrong step or not? Please help to check. Part1 1. น้ำกลั่น 54.7% 2. Aminocoat 0.5% 3. Raffinose 0.5% 4. Butylene Glycol 2% 5. Glycerin 2% 6.Licorice Extract ( Licochalcone A 1%) 0.5% Part2 Jojoba Oil 2% Argan Oil 2% Grape Seed Oil 1% E-Wax 4% Cetyl Alcohol 3 % stearic acid 3% Bisabolol 0.5% Kojic Acid Dipalmitate 3% Part3 isohexadecane 5% Dimethicone (Medium/350, Low-Odor) 5% Part4 Alpha Arbutin 1% Vitamin B3 3% Mulberry Extract 2% Aloe Vera Extract 2% Tomato Extract 2% Tocopheryl Acetate 0.1% Part5 Phenoxyethanol 1% น้ำหอม 0.2% Procedure 1. Divide the water to dissolve. Alpha Arbutin and Vitamin B3 2. Part1 and Heat Part2 to 70-80. 3. Pour Part1 into Part2, stir for a few minutes until the temperature drops below 70°C. 4. Pour Part3 into the recipe and continue to heat. Reduce to below 50°C. 5. Add Part4 and Part5 into the recipe and blend until combined. If there are any steps that are wrong, please advise. Thank you.
sujitra.ta
 
Posts: 9 (Click to watch)
Joined: Sat Oct 20, 2018 1:37 pm
Has thanked: 4 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Creamy, sticky texture

Postby touchzhakornxx » Thu Nov 01, 2018 2:24 am

From where I looked at the formula There are many ingredients that make it feel sticky. For example, the amount of wax is probably too high. Maybe 1-2% is used. If you want it to feel smooth and light when applying, try switching to it. Isododecane instead, the texture is lighter and thinner. isohexadecane and Dimethicone (Medium/350, Low-Odor) 5% This one should be heavy. go Try switching to Cyclomethicone in the same amount as replacement or may use Dimethicone type Light or Very light instead, please read at Staff team recommend more again. Thank you.
This answer received thanks from: staffsujitra.ta
Click here to convert your point to discount From thanks sent by other members
touchzhakornxx
 
Posts: 163 (Click to watch)
Joined: Sat Sep 13, 2014 1:32 pm
Has thanked: 2 Times
From thanks :: 118 Times
Recipes Count: 0

Re: Creamy, sticky texture

Postby sujitra.ta » Thu Nov 01, 2018 12:12 pm

I would like to edit the information. Part2 Bisabolol edit to Alpha Bisabolol Just read the details of each ingredient on the technical page. how much heat resistance Previously, only read more information. So I made many mistakes. Resolve the new compound method to Raffinose and Licorice Extract ( Licochalcone A 1%) was separated and dissolved in water. Alpha Arbutin and Vitamin B3 wait for temperature lower formula 30°C Alpha Bisabolol put it in the last step. The formula temperature must be lower. 40°C Kojic Acid Dipalmitate must be dissolved in oil at a temperature not higher than 60°C but saw staff reply in another thread http://www.myskinrecipes.com/topic8121.html is available at 80°C so I'm not sure at what temperature to melt. If you really need to melt at 60°C, you'll need to heat the oil to 70°C to dissolve the others first. and wait for the temperature to drop to 60°C to get the pattern Kojic Acid Dipalmitate , is that right? And the parts of water have to be at the same 60°C temperature to mix together, right? Yay Part3 isohexadecane and Dimethicone (Medium/350, Low-Odor) put it with oil and warm it together, can we? Because it can withstand 80°C heat, thank you.
sujitra.ta
 
Posts: 9 (Click to watch)
Joined: Sat Oct 20, 2018 1:37 pm
Has thanked: 4 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Creamy, sticky texture

Postby staff » Sat Nov 03, 2018 3:44 pm

Hello
Kojic Acid Dipalmitate must be dissolved in oil at temperatures not exceeding 60°C, but see the staff answer in another thread http://www.myskinrecipes.com/topic8121. html to melt at 80°C, so I'm not sure what temperature should be melted. If you really need to melt at 60°C, you'll need to heat the oil to 70°C to dissolve the others first. and wait for the temperature to drop to 60°C to get the pattern Kojic Acid Dipalmitate is fine, and the parts of the water must be at the same 60°C temperature in order to mix together, right? yaka
In actual mixing, it is not always necessary to achieve the exact temperature specified by the manufacturer. Using a slightly higher temperature Or slightly lower, for example, the recommended temperature is 60 degrees, but the actual mixing process is used at 50-70 degrees, it's not a problem.
isohexadecane and Dimethicone (Medium/350, Low-Odor) Ready Can we warm the oil together? because it can withstand heat 80°C
Can you do this?
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development

cron