Cosmetics Formulation Development


สอบถามเจลล้างหน้า

Need help and get help on cosmetics formulation development

ask for face wash

Postby natamon54 » Sat Nov 17, 2018 8:21 am

I would like to ask about the ingredients of the cleansing gel before ordering the production. The cleansing gel cleans well. gentle on skin Non-irritating Ingredients 1. Coco Glucoside 5% 2. Cocamidopropyl Betaine (Coco Betaine) 5% 3. Glycerin 99.5% 20% 4. 1,3- Propanediol (Natural) 5% 5. Poly-Conditioner Easy 2% 6. HyaCoat .TM Skin ( Cationic Hyaluronic Acid ) 0.1% 7. SugarThick .TM 3% 8. Phenoxyethanol SA 1% 9. Lactic Acid (AHA) 88% pH adjusted 10. น้ำกลั่น Sterile, Remaining Questions Do the ingredients go well together? Do you have the same mix of ingredients, please advise, thank you.
natamon54
 
Posts: 12 (Click to watch)
Joined: Thu May 14, 2015 10:05 am
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: question about face wash gel

Postby staff » Sat Nov 24, 2018 6:36 pm

Hello, I suggest you adjust the formula as follows. Sulfate Free Shampoo Base 20% Glycerin 99.5% 5% 1,3- Propanediol (Natural) 5% Poly-Conditioner Easy 2% HyaCoat .TM Skin ( Cationic Hyaluronic Acid ) 0.1% SugarThick .TM 3% Mild Preserved Eco 1% น้ำกลั่น sterile, the rest of the formula does not need to be adjusted pH because it already has an appropriate pH value (about 5-6.5) in the case of ordering through the system [ !-- w --> www.myskinrecipes.com/recipes must be submitted as a secret recipe only.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: question about face wash gel

Postby natamon54 » Sun Nov 25, 2018 6:35 am

thank you
natamon54
 
Posts: 12 (Click to watch)
Joined: Thu May 14, 2015 10:05 am
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: question about face wash gel

Postby natamon54 » Fri Dec 14, 2018 10:29 am

Ask for more information. 1. Sulfate Free Shampoo Base In the documentation it is recommended to use 25-30% for this cleansing gel, 20% is enough, yes. Maita 2. SugarThick .TM (Used 3%) No stock. Change. to EasyThick .TM 5% can I substitute? 1, 2, 3 stir well 2. Divide a portion of water, blend with 4, sprinkle 5 into the mix and blend well. 3. The remaining water mixed 6 ( EasyThick .TM) Warm Get 80 degrees to mix together 4. Mix together 1, 2, 3 5. Add 7 and mix well. Help check the mixing method. And please give advice. Thank you.
natamon54
 
Posts: 12 (Click to watch)
Joined: Thu May 14, 2015 10:05 am
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: question about face wash gel

Postby staff » Fri Dec 21, 2018 5:35 pm

Hello. It depends on the required level of washout. which members will have to test the adjustment up and down to meet your needs without a fixed rate of use Usually the usage rate is 5%, it will start to see the cleaning effect already. 2. It can be used as well. The usage rate depends on the level of viscosity you want [currently SugarThick in stock] To add ingredients that are not สารชะล้าง into the water and mix well first. when you get along well So gradually add the washing ingredients into the recipe, stirring gently to dissolve together. The reason for doing this is สารชะล้าง easily. If you mix it with water first Then mix the other parts with water. When blended to dissolve together. In this regard, for SugarThick or EasyThick must be added and dissolved in the formula that contains สารชะล้าง has to be added after filling. สารชะล้าง but stir gently to dissolve. Using heat will make it easier to melt. This is a way to reduce the chance of foaming. Due to light stirring, it has already dissolved.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: question about face wash gel

Postby natamon54 » Sun Dec 23, 2018 4:08 pm

thank you
natamon54
 
Posts: 12 (Click to watch)
Joined: Thu May 14, 2015 10:05 am
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0


Return to Cosmetics Formulation Development