Cosmetics Formulation Development


สอบถามสูตรกันแดดก่อนสั่งซื้อสารเพิ่ม

Need help and get help on cosmetics formulation development

Ask for sunscreen formula before ordering additional substances.

Postby kwannie.modeling » Thu Feb 07, 2019 1:19 pm

Please check the recipe. Want to make sunscreen, apply on face and body. Try to come up with a combination formula (or if the face and body formula should be done separately. Please advise the team to adjust the formula.) Oily skin, frequent outdoor activities. There is a blender, the need for sunscreen is not white. non sticky control it all day Waterproof, sweatproof, spf50up, formula, water part น้ำกลั่น 67.90% EDTA 0.10% Mild Preserved exo 1% oil Cetyl Alcohol 1% E-wax (existing) 4 % Tween20 1% Avobenzone 5% Oxybenzone 5% Octocrylene 10% lipid soft lite 5% (not sure if this part is calculated correctly to make the mixture สารกันแดด dissolve) 1. Mix the water mixture or blend it together and heat it to 70 degrees. 2. .Put all the oil ingredients together, heat to 70 degrees, blend well. 3. Take part of the water. Gradually pour in the oil. blend well (Temperature of water and oil must be similar or the mixture will separate) 4. Wait for the heat to cool until completely cooled. Packed into opaque bottles. Do not refrigerate, otherwise สารกันแดด will deteriorate quickly. e-wax (because it already exists) need to adjust the formula or calculate the solubility of the substance Please leave the team to fix it. Will this formula be sticky? I want you to apply it and be light on the skin. Will it get SPF 50? Read it and I'm still confused. Thank you.
kwannie.modeling
 
Posts: 53 (Click to watch)
Joined: Tue Oct 09, 2018 5:53 pm
Has thanked: 1 Times
From thanks :: 2 Times
Recipes Count: 0

Re: Ask for sunscreen formula before ordering additional substances.

Postby staff » Sun Feb 10, 2019 8:16 pm

Hello, the team doesn't know if the formula can be mixed or not. Because I do not know the E-Wax as mentioned by the members. Will be able to coordinate the formula or not? Should avoid any wax group as it will result in a sticky, unappealing effect. Sunscreen formulas will focus on the lightest. due to use during the day for members' recipes The study team recommends as follows: in order to get SPF more than 50 SPF Protect Ultra 12% PMMA Booster 4% LipidSoft Lite 4% Milk Lotion Maker 4% Xanthan Gum 0.5% Mild Preserved Eco 1% water, the rest to complete 100% The formula is light due to the use of สารกันแดด as low as possible and use PMMA Booster helps to increase your SPF while also helping to lighten the texture of the formula.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Ask for sunscreen formula before ordering additional substances.

Postby kwannie.modeling » Sun Feb 10, 2019 9:58 pm

Thanks for the recipe But if we change from Xanthan Gum as Pro Polymer Gel Maker instead, because I still have it at home.
kwannie.modeling
 
Posts: 53 (Click to watch)
Joined: Tue Oct 09, 2018 5:53 pm
Has thanked: 1 Times
From thanks :: 2 Times
Recipes Count: 0

Re: Ask for sunscreen formula before ordering additional substances.

Postby kwannie.modeling » Sun Feb 10, 2019 11:13 pm

We cut Xanthan Gum Exit Can I get the recipe? Check out the section of Milk Lotion Maker without body. gel in the formula
kwannie.modeling
 
Posts: 53 (Click to watch)
Joined: Tue Oct 09, 2018 5:53 pm
Has thanked: 1 Times
From thanks :: 2 Times
Recipes Count: 0

Re: Ask for sunscreen formula before ordering additional substances.

Postby kwannie.modeling » Sun Feb 10, 2019 11:26 pm

Can you check how to mix it? for members' recipes The study team recommends as follows: in order to get an SPF greater than 50 SPF Protect Ultra 12% PMMA Booster 4% LipidSoft Lite 4% Milk Lotion Maker 4% Mild Preserved Eco 1% น้ำกลั่น 75% 1. Warm up the oil. SPF Protect Ultra , PMMA Booster , lipid soft Lite, Milk Lotion Maker temperature 70 degrees. 2. Heat the water part with Mild Preserved Eco Temperature 70 degrees 3. Blend a portion of water. Then slowly add the oil. The temperature must be similar Continue blending until the meat is combined. How is it right if not? Please leave a correction. I have a question. The body SPF Protect Ultra waterproof. Is it in the body or any ingredient in the formula that is waterproof and sweatproof? Thank you.
kwannie.modeling
 
Posts: 53 (Click to watch)
Joined: Tue Oct 09, 2018 5:53 pm
Has thanked: 1 Times
From thanks :: 2 Times
Recipes Count: 0

Re: Ask for sunscreen formula before ordering additional substances.

Postby kwannie.modeling » Sat Feb 16, 2019 8:30 pm

Try adjusting the formula for indoor days. Copied from the web. Example recipe Water-in-Oil Cream to be waterproof. For sunscreen, use Titanium Dioxide 15nm Liquid : Oil part Titanium Dioxide 15nm Liquid 12.5% Zinc Oxide 35nm Liquid 5% Water-in-Oil EZ 2% Satin Cream Maker 0.5% Mild Preserved Eco 1% water 79% Procedure: heat the oil to 70 degrees, blend well, (titanium, Zinc, Water-in-Oil ) Blend the water together ( น้ำกลั่น , Mild Preserved ) Heat to a level close to the temperature of the oil part, then blend the oil part. while spinning gradually add water which will look like a liquid gel into the oil A little at a time Ingredients Can I do it? Is the procedure right?
kwannie.modeling
 
Posts: 53 (Click to watch)
Joined: Tue Oct 09, 2018 5:53 pm
Has thanked: 1 Times
From thanks :: 2 Times
Recipes Count: 0

Re: Ask for sunscreen formula before ordering additional substances.

Postby staff » Sun Feb 17, 2019 5:47 am

Hello
but if we change from Xanthan Gum as Pro Polymer Gel Maker instead, because I still have it at home
] Can you do it?
we cut Xanthan Gum can be removed from the formula. Did you go to the section of Milk Lotion Maker without gel body? In the formula
must test it. Creating a soft gel texture for the formula. It will help to create a creamy texture can be easier.
1.Preheat the oil part SPF Protect Ultra , PMMA Booster , lipid soft Lite, Milk Lotion Maker temperature 70 degrees. 2. Heat the water part with Mild Preserved Eco Temperature 70 degrees 3. Blend a portion of water. Then slowly add the oil. The temperature must be similar Continue blending until blended
PMMA Booster used to fill in the cream In the last step temperature of the water part and the oil part Must be equally hot, about 70 degrees at least. In the time of harmonization
Question: SPF Protect Ultra Waterproof Is it in the body or any ingredient in the formula that is waterproof? Sweatproof
Not waterproof by itself. If you want to be waterproof The formula must be made in the form Water-in-Oil or maybe add a waterproof mixture. help
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development