Clear Mascara Formulation with Polyester Film (Water Resistant, Hard)
Asked by: nuaom5562
On: August 14, 2018
Product Type:
Cosmetics
Question
Regarding the formulation of a clear mascara for eyebrows and eyelashes using Polyester Film (Water Resistant, Hard), I have the following questions:
- What is the recommended mixing method? Can it be mixed by stirring or whisking without a special stirrer?
- What type of water should be used?
- How much water is needed to achieve a 30% concentration if I use 10g of Polyester Film?
- Is a preservative necessary for this formulation?
Answer
Clear Mascara Formulation
Regarding your questions about making a clear mascara for eyebrows and eyelashes using Polyester Film (Water Resistant, Hard):
- Mixing Method: You can mix it by stirring or whisking without a special stirrer. However, the water must be hot, at least 80°C.
- Water Type: It is recommended to use distilled water or DI water. Mineral water is not recommended.
- Water Amount for 30% Concentration: If you use 10g of Polyester Film, you will need 23.3g of water to achieve a 30% concentration.
- Preservative: For personal use, a preservative is not necessary if you store the finished product in the refrigerator immediately after making it and every time after use.
- Complete Formula: The staff recommends checking the product detail page for Resist Film for the complete formulation details.
Related Products Mentioned
Purified Water, TDS Limit 1PPM)
Cosmetics
Polyester Film (Water Resistant, Hard)
Cosmetics
Resist Film (Water Base)
Cosmetics