ClearClean™ Usage in Liquid Soap/Shampoo for Clarity and Thickening

Hello,

Based on the product details for ClearClean™ provided by the staff, the mixing ratio is not specified as grams per 1kg of water. Instead, it is given as a percentage of the total formula weight.

Regarding your question "How much to add to 1kg of liquid soap?", the amount of ClearClean™ to use depends on the type of liquid soap and the desired viscosity. The recommendations are as follows:

• For general shampoo or liquid soap with a typical surfactant level (12-20% of the formula), use 6-10% of the total formula weight.
• For shampoo or liquid soap with high oil content (up to 15% oil), use 3-10% of the total formula weight.
• For shampoo or liquid soap with a low surfactant level (e.g., formulas for infants, with only 8-10% surfactant), use a higher amount of ClearClean™ at 9-16% of the total formula weight.

Therefore, for 1kg (1000 grams) of liquid soap, the amount of ClearClean™ to use would be approximately 30 grams to 160 grams, depending on your specific liquid soap formula.

Mixing Instructions for ClearClean™ in Liquid Soap:

According to the provided information, the steps to mix ClearClean™ to achieve a clear texture are as follows:

1. Add ClearClean™ to water in the desired proportion (calculated as a percentage of the total formula weight).
2. Add the surfactant.
3. Adjust the formula's pH to the range of 6.5-6.8 by adding a base (such as Triethanolamine). Stir until the texture becomes clear.
4. Add other ingredients to the formula, such as natural oils, silicones, or other conditioning agents.
5. Adjust the final pH to the range of 4-6 by adding an acid (maintaining the pH within 4-6 is crucial for a clear texture; if the pH is outside this range, the texture may become cloudy).
6. Add colors, beads, or pearl powders as desired.

Important Notes:

• ClearClean™ is a liquid, easy to mix, and does not require heating, but warming to 60-70°C can help it dissolve more easily into the formula.
• Avoid mixing at high speeds exceeding 2500 rpm, as this can damage the polymer and reduce the viscosity.
• Achieving a clear texture with ClearClean™ involves a somewhat delicate process and is recommended for those with experience in formulation. Beginners can still use it, but the resulting texture might not be as clear (if all steps are not followed precisely), although the formula's effectiveness will remain unchanged.

I hope this information is helpful. Please feel free to ask if you have any further questions.