Okay, thank you for providing the product information. You have excellent moisturizing ingredients with Vegetable Vaseline (Olus Oil), Shea Butter (Ultra Soft and Melt forms), and Sweet Almond Oil.

To create a lip balm with a solid texture, you will need to add a wax. The ingredients you currently have are oils and butters, which will be liquid or very soft at room temperature.

Here is a basic guideline for a natural lip balm formulation using your ingredients, assuming you add a natural wax like Beeswax, Candelilla Wax, or Carnauba Wax. The exact percentage of wax needed will depend on the specific wax used and the desired firmness of the balm. Beeswax is a common choice for lip balms.

Basic Natural Lip Balm Formulation (Requires adding Wax)

• Natural Wax (e.g., Beeswax, Candelilla Wax): 15-25% (Adjust based on desired hardness)
• Vegetable Vaseline (Olus Oil): 20-30%
• Shea Butter (Ultra Soft or Melt): 20-30% (You can use either or a combination of both)
• Sweet Almond Oil: 20-30%
• Optional: Vitamin E, essential oils for flavor/fragrance (use at very low percentages, typically 0.5-1%)

Instructions:

1. Weigh all your ingredients accurately.
2. Combine the wax, Vegetable Vaseline (Olus Oil), Shea Butter, and Sweet Almond Oil in a heat-resistant container.
3. Gently heat the mixture using a double boiler or microwave until all ingredients are completely melted and combined. Stir gently.
4. Once melted, remove from heat. If using, stir in Vitamin E and any essential oils.
5. Carefully pour the liquid mixture into your lip balm tubes or containers.
6. Let the balm cool completely at room temperature until solid. Avoid moving them while they are setting.

Vegetable Vaseline (Olus Oil) provides a creamy texture and natural emollience. Shea Butter is deeply moisturizing and helps condition the skin. Sweet Almond Oil is a light, nourishing oil rich in vitamins. Adding a wax will give the balm structure and staying power on the lips.

Remember to start with a small batch to test the consistency and adjust the wax percentage if needed for your desired texture.