How to Dissolve 12H Fix™ Fragrance Fixative
คำถาม
I am trying to dissolve 12H Fix™ at a 5% concentration. I have tried heating it with Ethyl Alcohol, but it did not dissolve even after heating for a considerable time. I also attempted to dissolve it with fragrance oil by stirring at high speed, both at room temperature and with heat, but it still did not dissolve. How can I properly dissolve 12H Fix™ at 5%?
คำตอบ
How to Dissolve 12H Fix™ (Fragrance Fixative)
Based on the product information for 12H Fix™ (Fragrance Fixative), the correct method for dissolving it and preventing precipitation is to use LipidSoft™ Lite and heat.
Here are the steps:
- Dissolve 12H Fix™ with LipidSoft™ Lite: Use LipidSoft™ Lite at a ratio of at least 2 parts LipidSoft™ Lite for every 1 part of 12H Fix™. For example, if you are using 5% 12H Fix™, use at least 10% LipidSoft™ Lite.
- Apply Heat: Heat the mixture of 12H Fix™ and LipidSoft™ Lite to 60-70 degrees Celsius while stirring until completely dissolved.
- Combine with Main Formula: Once the 12H Fix™ is fully dissolved in LipidSoft™ Lite, you can then add this mixture to your main formula, whether it is alcohol-based or contains fragrance oil. You do not need to use heat when mixing this dissolved solution into the main formula.
Your previous attempts to dissolve 12H Fix™ directly in Ethyl Alcohol or fragrance oil without using LipidSoft™ Lite and sufficient heat were likely unsuccessful because 12H Fix™ requires this specific solvent and temperature range for proper dissolution.
Following these steps should help you successfully incorporate 12H Fix™ into your formulation at a 5% concentration without issues.
ผลิตภัณฑ์ที่เกี่ยวข้องที่กล่าวถึง
