Using Pro Polymer in Water + Oil Formulas

Pro Polymer (Gel Maker) is suitable for creating gel textures in water-based formulas and creamy textures in formulations containing both water and oil, such as yours with olive oil and coconut oil.

Here's the recommended method for incorporating Pro Polymer:

1. Add to Water Phase: Begin by adding Pro Polymer to the water portion of your formula. Sprinkle the powder onto the water while stirring gently for 3-5 minutes until the gel starts to form.
2. Hydration Time: For optimal results, especially without high-speed mixing, allow the mixture to sit for approximately 24 hours after initial dispersion to ensure the Pro Polymer is fully hydrated. Then, blend slowly again until smooth.
3. Combine Phases: Once the water phase has gelled, you can slowly add your oil phase (containing olive oil and coconut oil) to the gel while stirring to create your desired cream-gel or emulsion texture.

The typical usage rate for Pro Polymer is between 0.5% and 5%. A concentration of around 0.8% is often sufficient for a standard gel, but you can adjust based on the desired thickness and other ingredients in your formula.