Hydroxyethyl Cellulose (HEC) (4500mPa.s)

  • Product Code: 1340

Provides a viscosity of 3,400-5,000 mPa s (cPs) at 1% in water.

฿35.00 This special price only valid for web order
gram (minimum 0 gram)

Unit price will be cheaper for larger size

The price will be calculated based on the size you enter

  •  
piece(s), Packing Cost: 0฿/pcs

The product will be packed based on the requested quantity

  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
Test Name Specification
Moisture (as packed) 5.0% Max
Sulphated Ash 6.0% Max
pH Value (1.0%) 5.5-8.0
Particle Size <0.180mm (80mesh) 85.0 Min
Viscosity Brookf. LV - 25C - 1.0% 3800-5000

Hydroxyethyl Cellulose (HEC) forms a non-ionic gel without the effect of electrolyte, suitable for formulations containing electrolyte. 

 

Please use to create gel texture in cleaning formula (shampo, liquid soap). Recommended to use. because it can help increase bubbles as well

 

Specifications

-Provides viscosity at 3,400-5,000 mPa s (cPs) at 1% in water.

- Melts and forms a gel at about 70 degrees and dissolves well at pH higher than 7 (use an alkali such as Triethanolamine helps to raise the pH value, after dissolving, can adjust the pH later) 

- Can be used in formulations that are acidic down to pH 3 and alkaline up to pH 9.

- no smell

 

 

Warm the water to 70 degrees, stir the water and gradually sprinkle the HEC powder into the hot water and continue to blend until it is completely dissolved. will get gel texture / Blend to disperse in cold water. Then heat up to 70 degrees while spinning continuously. when heat 70 degrees and then turn off the heat Blend continuously until cool.

 

 

1. Hydroxypropyl Methylcellulose (HPMC, USA) 

 

Hydroxyethyl Cellulose (HEC, USA)  

 

 

 

 

Product characteristics:

Solubility:

Storage:

Be the first to review this product :-)

Please login to write a review.

Example recipes using this ingredient:

Recommend Lab-Service
Lab Service Price
Hydroxyethyl Cellulose (HEC) (4500mPa.s)

Provides a viscosity of 3,400-5,000 mPa s (cPs) at 1% in water.

Hydroxyethyl Cellulose (HEC) forms a non-ionic gel without the effect of electrolyte, suitable for formulations containing electrolyte. 

 

Please use to create gel texture in cleaning formula (shampo, liquid soap). Recommended to use. because it can help increase bubbles as well

 

Specifications

-Provides viscosity at 3,400-5,000 mPa s (cPs) at 1% in water.

- Melts and forms a gel at about 70 degrees and dissolves well at pH higher than 7 (use an alkali such as Triethanolamine helps to raise the pH value, after dissolving, can adjust the pH later) 

- Can be used in formulations that are acidic down to pH 3 and alkaline up to pH 9.

- no smell

 

 

Warm the water to 70 degrees, stir the water and gradually sprinkle the HEC powder into the hot water and continue to blend until it is completely dissolved. will get gel texture / Blend to disperse in cold water. Then heat up to 70 degrees while spinning continuously. when heat 70 degrees and then turn off the heat Blend continuously until cool.

 

 

1. Hydroxypropyl Methylcellulose (HPMC, USA) 

 

Hydroxyethyl Cellulose (HEC, USA)  

 

 

 

 

Product characteristics:

Solubility:

Storage:

Mechanism -
Appearance -
Longevity -
Strength -
Storage -
Shelf Life -
Allergen(s) -
Dosage (Range) -
Dosage (Per Day) -
Mix Method -
Heat Resistance -
Stable in pH range -
Solubility -
Product Types -
INCI -

Cart

No products

Subtotal: ฿0.00
฿0.00 Total :