Cosmetics Formulation Development


ปัญหาการละลาย Chloroxylenol ดีแล้วแต่ผสมน้ำกลายเป็นตะกอน

Need help and get help on cosmetics formulation development

thawing problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby benjapa » Thu Mar 26, 2020 11:31 am

have dissolved PCMX with Ethyl​ Alcohol​ until dissolved well, meaning that it dissolves completely. But when it drops into the water, it is found that it clumps as shown in the picture. Change to dissolve in Propylene Gylcol until it dissolves well. When mixed with water, there is a problem of coagulation as well. I don't know what caused it. Can this be fixed? Please give advice. Want to mix with water to use as a disinfectant instead of Dettol ​
Attachments
IMG_20200326_112409.jpg
IMG_20200326_112409.jpg (2.82 MiB) Viewed 3346 times
IMG_20200326_110829.jpg
IMG_20200326_110829.jpg (2.85 MiB) Viewed 3346 times
2020-03-26-10-44-13.jpg
2020-03-26-10-44-13.jpg (1.43 MiB) Viewed 3346 times
benjapa
 
Posts: 24 (Click to watch)
Joined: Fri Jul 26, 2019 6:50 pm
Has thanked: 5 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Dissolution problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby staff » Mon Mar 30, 2020 11:32 pm

Hello, because Chloroxylenol is not soluble in water. When there is water in the formula Thus causing precipitation. The method that can be done is to solder by melting Chloroxylenol in the desired solvent. (According to the trial member is available for both Ethyl Alcohol , Propylene Glycol ) therefore mixed with Emulsifier and then bring it together with water or another case is to use Chloroxylenol (PCMX) (15% Water Soluble) which will be in liquid form. and can be dissolved in water directly
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Dissolution problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby taeioyou » Tue Mar 31, 2020 10:07 am

1. Asking for more details. Ask for the quantity Emulsifier how many % should be used? 2.Or if you want as a liquid should be used Emulsifier which one?
This answer received thanks from: benjapa
Click here to convert your point to discount From thanks sent by other members
taeioyou
 
Posts: 115 (Click to watch)
Joined: Sun Mar 10, 2013 6:12 pm
Has thanked: 7 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Dissolution problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby benjapa » Wed Apr 01, 2020 6:51 pm

[quote="staff"]Hello! cause because Chloroxylenol is not soluble in water. When there is water in the formula Thus causing precipitation. The method that can be done is to solder by melting Chloroxylenol in the desired solvent. (According to the trial member is available for both Ethyl Alcohol , Propylene Glycol ) when dissolved therefore mixed with Emulsifier and then bring it together with water or another case is to use Chloroxylenol (PCMX) (15% Water Soluble) which will be in liquid form. and can be dissolved in water directly
Please suggest that it should be used Emulsifier which one is there? Satin Cream Maker is it available? If you want to mix it like dettol, it is % PCMX = 4.8% Please advise. Many people have problems mixing and then melting. to dissolve with water according to the steps stated But there is a problem of sediment, the staff will have to find a solution to this problem. Questions keep coming. Thank you.
benjapa
 
Posts: 24 (Click to watch)
Joined: Fri Jul 26, 2019 6:50 pm
Has thanked: 5 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Dissolution problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby maimiyuki999 » Thu Apr 02, 2020 10:55 am

Ask for more information if quantity % PCMX =4.8% It can be directly mixed with water and not mixed with other substances at all. Will it be effective for disinfecting as recommended by the WHO, or is it necessary to mix other products? Feel free to give advice.
maimiyuki999
 
Posts: 1 (Click to watch)
Joined: Wed Apr 01, 2020 12:32 am
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Dissolution problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby staff » Tue Apr 07, 2020 9:19 pm

Hello, Final concentration of Chloroxylenol used to kill coronavirus is 0.12%.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Dissolution problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby benjapa » Thu Apr 09, 2020 7:11 pm

Interfere with staff to help answer questions about Emulsifier to dissolve PCMX as well. Until now, I haven't. Solution​ to solve the problem of dissolving this substance at all. And saw many posts facing the same problem, many people. Thank you.
This answer received thanks from: taeioyou
Click here to convert your point to discount From thanks sent by other members
benjapa
 
Posts: 24 (Click to watch)
Joined: Fri Jul 26, 2019 6:50 pm
Has thanked: 5 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Dissolution problem Chloroxylenol Good, but mixed with water becomes sediment.

Postby staff » Wed Apr 15, 2020 8:49 pm

Hello, choose to use Emulsifier type that can be used to heat all kinds of solder. The structure of the formula is as follows. Any type of Cream Maker oil that uses heat for brazing, eg Soft Cream Maker , Butter Cream Maker , Milk Lotion Maker 3-5% Propylene Glycol 5% Chloroxylenol (PCMX) (100% Powder) 0.2% water part Ingredients that are dissolved in water, water to 100% in the soldering process, both parts must be heated at the same temperature and at least 75-80 degrees. It will look like a creamy formula.
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development