Cosmetics Formulation Development

-----Formula 1 Cream------ Phase A (Water) 1% 1% Water 75.4% 0.1% Phase B (Glycol) 3% 3% 1% Phase C (Oil) 10% ( ) 1%, spin at 80 degrees, wait until cool and add. 1% Natural 1% 1.5% Blend until homogeneous A+B+C Blend until homogeneous then add. ( ) 1% and blend until dissolved ----- Formula 2 Gel----- Phase A (Water) 1% 0.8% Water 68.6% 0.1% (Extra Pure)0.5% Phase B (Glycol) 5% 12% ( ) 3% 99.5% 3% Phase C (Oil) 5% A+B+C blend until homogeneous, adjust pH with 99% until pH 3.5 ----- Formula 3 Body Lotion---- -- Phase A (Water) 99.5% 3% Water 77.4% 0.1% 3% ™ ( ) 5% ( ) 4% (Extra Pure)0.5% Phase B (Oil) 10% 1% Blend until homogeneous A+B Blend until homogeneous thank you very much

Hello, Phase A (Water) 1% 1% Water 75.4% 0.1% Phase B (Glycol) 3% 3% 1% Phase C ( Oil) 10% ( ) 1%, spin at 80 degrees, wait until cool and add. 1% Natural 1% 1.5% Blend until homogeneous A+B+C Blend until homogeneous then add. ( ) 1% and blend until dissolved The formula can be mixed but may cause the cream to melt. if too liquid consider increasing the proportion of 1.7-2.0% Yes -----Formula 2 Gel----- Phase A (Water) 1% 0.8% Water 68.6% 0.1% (Extra Pure)0.5% Phase B (Glycol) 5% 12% ( ) 3% 99.5% 3% Phase C (Oil) 5% A+B+C blend until homogeneous, adjust pH with 99% until pH 3.5[ /quote] This formula will crash. will not dissolve in formulas. because there is a part of water must be used as soluble instead [quote: 5xsyxctn]-----Formula 3 Body Lotion------ Phase A (Water) 99.5% 3% Water 77.4% 0.1% 3% ™ ( ) 5% ( ) 4% (Extra Pure)0.5% Phase B (Oil) 10% 1% blended until homogeneous A+B blended until homogeneous The formula can be mixed. If the meat is liquid can adjust the proportion of can be added in all 3 recommended recipes. Choose to 1% is more gentle on the skin than

Gel This one brings ( ) 3% normal type to dissolve in 12% before can not help the formula dissolve. Can I have water? -Then please add a little bit can be soldered in formulations with water+ ( ) or water+ ( )+oil( ) or not if you do not use the ( , Odorless) what texture will it have? - Finally, those formulas are mixtures. / oil-in-water can be mixed. using crescent instead of , thank you. PS. Sorry for asking. a lot just about to order will be able to order at once

Hello - This Gel brings ( ) 3% normal type to dissolve in 12% before can not help the formula dissolve. Can it be water? is soluble. good in but after mixed with the water (or the water-based main part) will cause precipitation because insoluble in water - so please add a little bit can be soldered in formulations containing water+ ( ) or water+ ( )+Oil( ) or not? ( , Odorless) What texture will it have? can be done, but the proportion of oil+silicone Not too high. If it's more than 15%, you will start to risk separation. And will separate when more than 20% in. also need a helper such as , help stabilize the formula -lastly, those formulas are mixtures. / oil-in-water can be mixed. using crescent instead of , thank you All can be blended with , but only the stirrer must be selected as the disperser. Use a different shape of the blender head. Because there is no stirring force for emulsion to blend together well.