Cosmetics Formulation Development


สอบถามข้อมูลเพิ่มเติ่ม ของสาร silky Serum base Plus

Need help and get help on cosmetics formulation development

Ask for more information about silky Serum base Plus.

Postby technical_rd » Thu Oct 21, 2021 9:56 am

Please inquire. I use the substance Silky Serum Base Plus 15% is the main base for creaming and Contains 5% oil. At first, it has a beautiful creamy texture. But after a while, the leftover oil gradually faded as if separating the layers. I would like to ask for advice. 1. There is no substance in the formula. Magnesium Sulfate and if not use this What substance should I use instead? Thank you.
technical_rd
 
Posts: 2 (Click to watch)
Joined: Thu Oct 21, 2021 9:46 am
Has thanked: 0 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Ask for more information about silky Serum base Plus.

Postby staff » Thu Oct 21, 2021 10:21 pm

Hello, I would like to know the mixing process. And how to spin (agitator, rotation speed, time) as well. The total oil proportion is only 5%, correct? The rest is all water, right?
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Ask for more information about silky Serum base Plus.

Postby technical_rd » Fri Oct 22, 2021 4:11 pm

The steps are as follows: 1. Silky Serum Base Plus 15% +oil 5% Homo until combined ( Homogenizer laboratory, speed 20-25, duration 3 minutes) 2.Water 60 % gradually add to item 1 until homogeneous 3. Part active 10% gradually add to item 1 until homogeneous 4. perservative gradually add to item 1 until homogeneous ****The total oil proportion is only 5%, is that correct? The rest is all water, right? - Yes.
This answer received thanks from: cornucopia-7124
Click here to convert your point to discount From thanks sent by other members
technical_rd
 
Posts: 2 (Click to watch)
Joined: Thu Oct 21, 2021 9:46 am
Has thanked: 0 Times
From thanks :: 1 Times
Recipes Count: 0

Re: Ask for more information about silky Serum base Plus.

Postby staff » Sat Oct 30, 2021 9:13 pm

Hello, suggest to add Magnesium Sulfate 1% In the water part, since the soldering process (add in water and then gradually bring the part of the water to add to the bass while spinning)
Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development