The first step is to mix the water phase first 1.
น้ำกลั่น 65 % 2.
Glyceryl glucoside 3% 3.
Aristoflex AVC 2% 4.ethanol 2% oil phase 1 .
น้ำมันมะพร้าว 6% 2.Wax Maker 19.25 % Bring the oil and water phases to a temperature of 165 degrees, then wait for both phases to cool down, then mix and add
สารกันเสีย Microcare (PHC) 1% got the cream as shown in the picture above. Approximately obtained pH at 8, cream that has a rancid smell, very viscous, clotted. In the second round of experiments (new formula), reduce the amount of Aristo flex
AVC replace
น้ำมันมะพร้าว to
lipid soft moist without ethanol Experiment by separating water and oil phases. Water phase 1.
น้ำกลั่น 70% 2.
Glyceryl glucoside 2.5% 3.
Aristoflex AVC 1% oil phase 1.
lipid soft moist 15.5% 2.Wax Maker 10% Melt the oil phase and water phase at a temperature of approximately 165 degrees, wait for the cream to cool down to a temperature of not more than 80 degrees, then mix together and drop
สารกันเสีย ]
สารกันเสีย Microcare (PHC) 1% pHapproximately 7. The resulting cream does not have a rancid smell. less lump The need is to adjust the formula of the cream to make the cream have a smooth texture and adjust the pH to 5.5 by using citric acid (but have not tried mixing it in the cream). The first step is to mix the water phase first. 1.
น้ำกลั่น 65 % 2.
Glyceryl glucoside 3% 3.
Aristoflex AVC 2% 4.ethanol 2% oil phase 1.
น้ำมันมะพร้าว 6% 2.Wax Maker 19.25 % take oil and water phase. Set the temperature to 165 degrees, then wait for the 2 phases to cool, then mix together and add
สารกันเสีย Microcare (PHC) 1%, get the cream as shown in the picture above. Approximately obtained pH at 8, cream that has a rancid smell, very viscous, clotted. In the second round of experiments (new formula), reduce the amount of Aristo flex
AVC replace
น้ำมันมะพร้าว to
lipid soft moist without ethanol Experiment by separating water and oil phases. Water phase 1.
น้ำกลั่น 70% 2.
Glyceryl glucoside 2.5% 3.
Aristoflex AVC 1% oil phase 1.
lipid soft moist 15.5% 2.Wax Maker 10% Melt the oil phase and water phase at a temperature of approximately 165 degrees, wait for the cream to cool down to a temperature of not more than 80 degrees, then mix together and drop
สารกันเสีย ]
สารกันเสีย Microcare (PHC) 1% pHapproximately 7. The resulting cream does not have a rancid smell. less lump The need is to adjust the formula of the cream to make the cream have a smooth texture and adjust the pH to 5.5 by using citric acid (but haven't tried mixing it in the cream yet).