How to Mix Yellow EasyMix™ into Foundation

Mixing Yellow Iron Oxides EasyMix™ into your existing foundation to adjust the color is a simple process. Since EasyMix™ powders are specially coated, they disperse easily without needing complex equipment.

Here are the steps and what you might need:

Process and Steps

1. Prepare: Take a small amount of your existing foundation that you want to adjust. You can put it on a clean surface like a palette, the back of your hand, or a small container.
2. Add Color Gradually: Slowly add a tiny amount of Yellow Iron Oxides EasyMix™ powder to the foundation. It's best to start with a very small amount, as a little pigment can go a long way.
3. Mix Thoroughly: Use a clean spatula, a small brush, or even a clean finger to mix the powder into the foundation. Stir and blend until the color is completely uniform and there are no streaks of powder.
4. Test the Color: Apply a small amount of the mixed foundation to your jawline or neck to see if it matches your skin tone. Check it in natural light if possible.
5. Adjust if Needed: If the color is still not yellow enough, repeat steps 2-4, adding a tiny bit more Yellow Iron Oxides EasyMix™ and mixing again until you achieve the desired shade.

Equipment

You don't need specialized equipment for this. You can use items you likely already have:

• A clean surface for mixing (palette, back of hand, small dish)
• A small spatula, brush, or clean finger for mixing

This method allows you to customize your foundation shade precisely to match your unique yellow undertones. If you find that a purely yellow tone isn't quite right, you might also consider using a small amount of Beige Iron Oxides EasyMix™ or other shades to fine-tune the color, as suggested previously.