Antiperspirant Wet Wipes Formula

You are looking for a formula for antiperspirant wet wipes that are fast-drying and non-irritating. You provided a draft formula, and feedback was given regarding the use of fragrance.

Based on the feedback and the properties of the ingredients, here is a revised formula designed to be effective, fast-drying, and gentle:

• Anti-Sweat™ (Aluminum Chlorohydrate): 25%
• Water: 48.5%
• Ethyl Alcohol (99.9%): 25%
• Mild Preserved Eco™: 1.5%

Total: 100%

Explanation of the Formula:

1. Anti-Sweat™ (Aluminum Chlorohydrate): This is the active antiperspirant ingredient. The percentage has been adjusted to the maximum recommended usage rate (25%) for optimal sweat and odor control, while adhering to guidelines.
2. Water & Ethyl Alcohol: This forms the liquid base for the wet wipes. A significant amount of Ethyl Alcohol is included to promote fast drying upon contact with the skin, addressing your requirement for quick drying. The ratio of water to Aluminum Chlorohydrate is kept below 2:1, which helps ensure a dry feel on the skin after application, as suggested by the product information for Anti-Sweat™.
3. Mild Preserved Eco™: This ingredient acts as a preservative for the wet wipe formula. The usage rate of 1.5% is appropriate for wet wipes to prevent microbial growth and ensure product safety and shelf life. It is also noted for being gentle and not classified as a traditional preservative by the FDA, aligning with the desire for a non-irritating product.

Regarding Fragrance:

The staff feedback correctly pointed out that fragrance can be a source of skin irritation, especially in a leave-on product like a wet wipe. To prioritize a non-irritating formula, fragrance has been omitted from this revised suggestion. If fragrance is essential, it would require the addition of a solubilizer like Flora Solve™ Clear, as suggested by the staff, and would slightly alter the percentages of the other liquid components.

Mixing Instructions:

1. In a suitable container, add the Water.
2. Gradually add the Anti-Sweat™ (Aluminum Chlorohydrate) to the Water while stirring until it is fully dissolved. The mixture may appear cloudy initially but should clear over time (potentially up to 24 hours).
3. Add the Ethyl Alcohol and Mild Preserved Eco™ to the mixture.
4. Stir until all ingredients are uniformly combined and the liquid is clear.
5. This liquid solution is then used to saturate the wet wipe material.

This formula provides effective antiperspirant action, dries quickly, and is formulated to be gentle on the skin by avoiding common irritants like fragrance and using an appropriate preservative for wet wipes.