Cream Formulation Guide for Sensitive, Dry, and Aging Skin

Cream Formulation Guide for Sensitive Skin: Restore, Nourish, Anti-Aging, Smooth, and Brighten

This formulation concept is designed to strengthen the skin barrier, provide deep hydration, reduce irritation, and promote a more youthful and radiant complexion. It is ideal for sensitive, dry, and aging skin.

Recommended Key Ingredients:

• Ceracare™ Liposome-3 (Liposome Ceramide Complex, 3 Types): 1-3%
  • Helps strengthen the skin barrier, reduce transdermal water loss (TEWL), and decrease skin sensitivity.
  • Provides deep moisturization and enhances skin brightness.
  • Its structure mimics human skin lipids, ensuring excellent absorption.
• Ceracare™ NP50 (Water/Oil Dispersible Ceramide NP): 0.1-0.5% (0.2% recommended)
  • A highly concentrated (50%) Ceramide NP that locks in moisture, repairs the skin barrier, and reduces irritation.
  • Utilizes Solid Lipid Carrier technology for enhanced stability and efficacy.
  • Contributes to a more youthful appearance.
• Natural Moisturizing Amino Acids (e.q. Prodew 400): 3-5%
  • A blend of 8 amino acids and Sodium PCA that mimics the skin's Natural Moisturizing Factors (NMFs).
  • Leaves skin soft, hydrated, and accelerates wound healing.

Cream Formulation Structure (Example Guideline):

Part 1: Water Phase

• Deionized Water: QS (Quantity Sufficient to 100%)
• Humectants: e.g., Glycerin, Butylene Glycol (aids in Ceracare™ NP50 dispersion)
• Thickeners: e.g., Carbomer, Xanthan Gum (to build cream texture)
• Natural Moisturizing Amino Acids: 3-5% (add to water phase)

Part 2: Oil Phase

• Emollients: e.g., Caprylic/Capric Triglyceride, Squalane, Jojoba Oil (for skin comfort)
• Emulsifiers: e.g., Cetearyl Olivate & Sorbitan Olivate, Glyceryl Stearate (to form the cream)
• Fatty Alcohols: e.g., Cetyl Alcohol, Stearyl Alcohol (for stability and texture)
• Ceracare™ NP50: 0.1-0.5% (can be dispersed well in oil at 80-85°C)

Part 3: Active & Cooling Phase (Add after cooling)

• Ceracare™ Liposome-3: 1-3% (disperse directly in water)
• Preservatives: e.g., Phenoxyethanol, Ethylhexylglycerin (essential for water-containing products)
• Antioxidants: e.g., Vitamin E (to protect the formula and skin)
• Soothing Agents: e.g., Bisabolol, Allantoin (to further reduce irritation)
• Brightening Agents: If enhanced skin tone evening is desired, consider adding Niacinamide (should be added to the water phase after cooling).

General Cream Formulation Steps:

1. Prepare Water Phase: Heat the Water Phase to 70-75°C, stirring until all ingredients are dissolved and well combined. Add Natural Moisturizing Amino Acids to this phase.
2. Prepare Oil Phase: In a separate container, heat the Oil Phase to 70-75°C, stirring until all ingredients are dissolved and well combined. If using Ceracare™ NP50 in the oil phase, disperse it in the oil at 80-85°C before combining with the water phase.
3. Combine Water and Oil Phases: Slowly pour the oil phase into the water phase (or vice versa, depending on the emulsifier type) while stirring or homogenizing at medium speed until an emulsion forms.
4. Cool Down and Add Active Phase: Continue stirring or homogenizing until the cream's temperature drops to approximately 40°C. Then, add Ceracare™ Liposome-3, preservatives, antioxidants, and any other heat-sensitive active ingredients. Stir until thoroughly mixed.
5. Adjust pH and Viscosity: Check the cream's pH and adjust it to a skin-friendly range (typically 5.0-6.0). Verify the desired viscosity.

Additional Considerations:

• Ceracare™ Liposome-3 and Ceracare™ NP50: Should be stored in a refrigerator at 6-10°C and should not be frozen.
• Natural Moisturizing Amino Acids: Should be stored away from light and heat, and avoid prolonged stirring or shaking to prevent clumping.
• Selecting appropriate emulsifiers and thickeners is crucial for creating a stable and pleasant cream texture.
• You can find links to all mentioned products below this answer.