Formulating 10% AHA Gel with FastRelief™ and Pro Polymer to Reduce Irritation

Based on the previous responses from the staff, FastRelief™ can indeed be incorporated into the AHA gel formulation using Pro Polymer to help reduce irritation.

The staff recommended a formula for a 10% AHA gel and provided the steps. While you have experience with 30% AHA, the staff advises limiting home formulations to 10% for safety.

Here is the recommended formula and steps for a 10% AHA gel with FastRelief™ and Pro Polymer, as provided by the staff:

Formula:

• Glycolic Acid (AHA) 100% Powder: 10%
• Pro Polymer: 1.5%
• FastRelief™: 1.5%
• Mild Preserved Eco (or Phenoxyethanol SA): 1%
• Water: Remaining percentage

Mixing Steps:

1. Combine Pro Polymer and Water. Blend until a thick gel is formed.
2. Add FastRelief™ and the preservative (Mild Preserved Eco or Phenoxyethanol SA). Blend until well combined.
3. Gradually add the Glycolic Acid (AHA) 100% Powder, 1-2% at a time, blending until dissolved after each addition. The gel will become less viscous as more AHA is added.
4. If the mixture becomes too liquid, you can add more Pro Polymer to thicken it to your desired consistency.

Regarding your question about using Phenoxyethanol SA, the staff confirmed that it can be used instead of Mild Preserved Eco, and the mixing method remains the same.

Please note the staff's strong recommendation to use only 10% AHA for home formulations due to safety concerns with higher concentrations.