Formulation for a Cleanser with BHA and Pearly Texture
Asked by: krittanat_ping
On: January 24, 2014
Product Type:
Cosmetics
Answered
Question
Based on the following formula, is it viable? If so, what are the preparation steps? Also, how can the formula be made whiter, more pearly, and thicker?
Formula:
- Coco-Betaine (10%)
- Propylene Glycol (10%)
- Lauryl Glucoside (5%)
- emulpearl (3%)
- BHA, Timed-Release (3.3%)
- Water (67.7%)
- Phenoxyethanol (1%)
Answer
Based on the conversation provided, the formula you shared is considered viable, as indicated by user 'cosmeceutical7'. They also provided detailed steps on how to prepare it.
Here is a summary of the preparation steps and suggestions from the conversation:
Preparation Steps:
- Part A: Combine Coco-Betaine (10%), Propylene Glycol (10%), Lauryl Glucoside (5%), and emulpearl (3%). Gently warm this mixture and stir slowly until combined, avoiding strong stirring to prevent excessive foam.
- Part B: Combine BHA, Timed-Release (3.3%) and Water (67.7%). Mix by stirring or swirling. If foam forms, let it sit until the foam disappears.
- Combine: While Part A is still warm (but not hot, turn off the heat), slowly add Part B to Part A. Stir gently until fully combined, again being careful not to create too much foam.
- Final Addition: Once combined, add Phenoxyethanol (1%) and mix.
Suggestions:
- The resulting formula will have a pearly appearance from the emulpearl but won't be very white.
- To make the formula whiter and more pearly, and also increase viscosity, you can add Glyceryl Stearate. Start with around 2%.
- If adding Glyceryl Stearate, include it with the ingredients in Step 1 (Part A) as it requires some heat to dissolve.
- Be mindful of stirring too vigorously at any step, as this can create a lot of foam.
It seems like a feasible formula based on the discussion!