How to Make Pressed Eyeshadow Powder

To transform loose eyeshadow powder into a pressed format like those commonly available, you primarily need to add a binding agent. This agent helps the powder particles adhere to each other, allowing them to be pressed into a solid cake.

Here are the key components and steps:

1. Powder Base: This is your existing loose eyeshadow powder.
2. Binder: A crucial ingredient that holds the powder together when pressed. A common binder used in makeup is Magnesium Myristate. It not only helps bind the powder but also improves adhesion to the skin and provides a smooth feel.
3. Other Fillers/Texture Enhancers (Optional but Recommended): Ingredients like Sericite Powder (CompactPro™) are often used in pressed powders. They contribute to the texture, spreadability, and natural look of the finished product.
4. Liquid (Solvent): A small amount of a liquid (like isopropyl alcohol or a dry binder liquid specifically for cosmetics) is usually mixed with the powder and binder to help distribute the binder evenly before pressing. The liquid evaporates after pressing, leaving the binder behind to hold the powder cake.

General Process:

• Mix your loose eyeshadow powder with the binder (e.g., Magnesium Myristate) and any other desired fillers (e.g., Sericite Powder). The percentage of binder needed can vary, but typically ranges from 1-10% of the total powder weight. Start with a lower percentage and adjust as needed.
• Gradually add a small amount of the liquid solvent to the powder mixture while stirring until it reaches a slightly damp, sand-like consistency. Be careful not to add too much liquid.
• Transfer the mixture into your pressing pan.
• Place a pressing tile or a piece of tissue over the powder and press down firmly and evenly using a pressing tool or a flat object. Apply pressure to compact the powder into the pan.
• Let the pressed powder dry completely (usually for 12-24 hours) to allow the liquid to evaporate and the binder to set.

Using ingredients like Magnesium Myristate and Sericite Powder can help you achieve a pressed eyeshadow with good texture and adhesion, similar to commercial products.

Regarding the videos you mentioned, the staff has noted that they are still planned but are temporarily on hold due to staffing limitations. Thank you for your patience.