Making Clear Mouthwash with Four-EO and Poloxamer 407 in Herbal Water

Based on the information provided, here is a recommended approach for using Four-EO and Poloxamer 407 in 1 liter of herbal water for mouthwash, along with the mixing instructions:

Recommended Usage Rates (based on pure water formulation):

• Four-EO: 0.20% - 0.35%
• Poloxamer 407: 0.5% - 2.0% (adjust amount until the mixture becomes clear)
• Global Guard™: 1% (as a preservative, based on the staff's example formula)
• Herbal Water: The remaining amount to reach 1 liter (100%).

Amounts for 1 Liter (1000g):

• Four-EO: 2g - 3.5g
• Poloxamer 407: 5g - 20g (start low and add gradually)
• Global Guard™: 10g
• Herbal Water: Approximately 966.5g - 983g (1000g - Four-EO amount - Poloxamer 407 amount - Global Guard amount)

Mixing Instructions:

1. Add the recommended amount of Four-EO to the herbal water.
2. Mix thoroughly until combined. The mixture will likely appear cloudy.
3. Gradually add Poloxamer 407, starting with a small amount (e.g., 0.25% or 2.5g for 1 liter).
4. Mix until the Poloxamer 407 is dissolved.
5. Check if the mixture has become clear. If it is still cloudy, add another small amount of Poloxamer 407 (e.g., another 0.25%) and mix again.
6. Repeat step 5 until the mixture becomes clear. The total amount of Poloxamer 407 used will likely be between 0.5% and 2.0%.
7. Add Global Guard™ and mix until fully incorporated.

Important Note:

The usage rates and mixing method provided are based on a formulation using pure water. Since you are using herbal water, which may contain various compounds, you must perform your own testing to ensure the ingredients dissolve correctly and the final product is stable and clear. The amount of Poloxamer 407 needed to achieve clarity may vary depending on the specific herbal water used.