Matte Liquid Lipstick Formulation: Substitutes and Texture

Regarding your questions about the matte liquid lipstick formulation:

1. Oil Film (Hydrogenated Polycyclopentadiene) Substitute: Yes, as suggested by the staff, you can use either Silicone Film (Long-Wear, Hard, Isododecane Base) [Product ID 1311] or Silicone Film (Long-Wear, Hard, Cyclomethicone Base) [Product ID 1075] as alternatives for Oil Film (Hydrogenated Polycyclopentadiene) [Product ID 1078]. Please refer to the product pages for these alternatives for example formulations.
2. Microcrystalline Wax vs. Beeswax: Microcrystalline Wax [Product ID 616] provides specific structural and textural properties essential for a matte liquid lipstick. Beeswax has different characteristics (such as melting point and tackiness) and is generally not a direct substitute if you aim to maintain the original formula's matte finish and feel. Substituting Microcrystalline Wax with Beeswax might result in a less matte, potentially tackier product. We recommend using Microcrystalline Wax or a tested alternative suitable for matte formulations.
3. Adding Silk Talc Powder for Creaminess: Adding Silk Talc Powder (Methicone Coated) [Product ID 283] will primarily enhance the matte finish and oil absorption, which can sometimes contribute to a drier feel. While it can improve texture, adding powder alone is unlikely to make the formula significantly "creamier" in terms of emollience. Creaminess typically comes from the liquid/oil phase. To achieve a less drying, creamy feel while maintaining a matte look, you would likely need to adjust the overall balance of film formers, powders, and emollients in the formula. Simply adding talc might increase mattness but could also increase dryness.