Mixing Alpha Arbutin with Aloe Vera Gel Base

Yes, you can mix Alpha Arbutin (Switzerland) with Aloe Vera Gel (Heavy) base.

Adding 2 grams of Alpha Arbutin to 100 grams of the Aloe Vera Gel (Heavy) base will result in a 2% concentration of Alpha Arbutin in the final product. This concentration is within the recommended usage rate (0.2-2%) and is the recommended percentage for skin whitening effects.

Mixing Instructions:

1. Ensure the Aloe Vera Gel (Heavy) base is at room temperature. If it's been refrigerated, let it warm up first.
2. Add the Alpha Arbutin powder directly to the gel base.
3. Stir the mixture for 3-5 minutes until the powder appears mostly dispersed.
4. Let the mixture sit for 15-30 minutes to allow the powder to hydrate and dissolve.
5. Stir again thoroughly until the Alpha Arbutin powder is completely dissolved and no particles are visible floating in the gel.

Important Considerations:

• Alpha Arbutin is most stable and effective in formulations with a pH between 3.5 and 6.5. Ensure the final pH of your mixture falls within this range. Mixing Alpha Arbutin into formulations with a pH higher than 8 can cause it to break down into hydroquinone.
• The Aloe Vera Gel (Heavy) base is not a finished cosmetic product. If you plan to distribute the final mixture, you must comply with local regulations, including potential FDA registration.