Mixing Nano Silver with Alcohol Spray for Disinfection

To create a disinfecting alcohol spray using 2000ppm Nano Silver liquid solution:

Based on the product information, the recommended type of Nano Silver for disinfection in a liquid or spray form is the 2000ppm liquid solution. There are a few variations of this (Ionic pH 4-6, Ionic pH 10-12, and Colloidal Yellow), but the recommended usage rate for disinfection is the same for all of them.

The recommended usage rate for the 2000ppm Nano Silver liquid solution for disinfection purposes is typically 2%.

To mix this with 1 liter of alcohol spray base:
1 liter of liquid is approximately 1000 grams.
2% of 1000 grams is (2 / 100) * 1000g = 20 grams.

So, you should add 20 grams of the 2000ppm Nano Silver liquid solution to 1 liter of your alcohol spray base.

Here are the mixing instructions:

1. Measure 1 liter (approximately 1000 grams) of your alcohol spray base.
2. Measure 20 grams of the 2000ppm Nano Silver liquid solution (such as the Ionic pH 4-6, Ionic pH 10-12, or Colloidal Yellow type).
3. Add the 20 grams of Nano Silver liquid solution to the 1 liter of alcohol spray base.
4. Mix thoroughly until the Nano Silver is evenly dispersed in the alcohol spray.

Your disinfecting alcohol spray is now ready to use.