Questions about Instant Wrinkle Remover Formula: Argireline Addition, Texture, Stability, and Packaging

Based on your questions and the previous conversation, here is a summary and response regarding the Instant Wrinkle Remover formula:

This formula is designed to provide an instant, temporary lifting and smoothing effect on wrinkles, primarily due to the ingredient InstantLift™. It works by forming a film on the skin that tightens as it dries. This effect is temporary and washes off.

Regarding your questions:

1. Adding Acetyl Hexapeptide-8 (Argireline): Yes, you can add Acetyl Hexapeptide-8 (Argireline) to this formula. As the staff mentioned, this ingredient is known for potential long-term wrinkle reduction benefits. However, adding it will not change the fundamental nature of this specific formula, which is designed for instant, wash-off results.
2. Long-term vs. Temporary: You are correct. The example formula provided is for temporary results. It does not provide long-term wrinkle reduction benefits on its own. For long-term effects, ingredients like Acetyl Hexapeptide-8 would typically be used in a leave-on product formulation.
3. Mixing Issues (Lumps and Evaporation):
   • Lumps: The small particles or lumps are not normal and indicate that one or more powder ingredients, likely ClayThick™ as you suspected, did not fully dissolve or disperse. The staff recommended heating the water/ClayThick™ mixture to 60°C and blending at high speed for about 15 minutes to help with dispersion.
   • Evaporation during heating: Heating water for a long time, even at 60°C, can cause evaporation, especially with prolonged blending. To minimize water loss when heating in a beaker using a water bath, you can try loosely covering the top of the beaker with something like aluminum foil or a watch glass. This helps trap some of the steam and reduce evaporation while still allowing for blending.
4. White Residue: You mentioned experiencing significant white residue compared to commercial products like Ageless. The staff indicated they did not have further specific advice on how to resolve this issue for this particular formula beyond ensuring all ingredients are fully dissolved and dispersed.
5. Hardening in Storage: The hardening of the surface layer in your stored formula is due to water evaporation. Ingredients like InstantLift™ dry and solidify when the water they are dissolved in evaporates. To prevent this, you need to store the finished product in an airtight container that prevents water from escaping. The jar you used likely did not have a sufficient seal.
6. Sealing with Film: Regarding using heat-shrink film, the staff mentioned they are not packaging experts and couldn't confirm if it would be sufficient to prevent evaporation. An airtight container designed for cosmetics is generally recommended.

In summary, the formula provides a temporary lifting effect. You can add Argireline for potential long-term benefits, but the base formula remains temporary. Ensure ClayThick™ is fully dispersed using heat and high-speed blending, trying to minimize water evaporation during this step. Store the final product in an airtight container to prevent hardening due to water loss.