Simple Body Cream Scrub Formulation (1 kg)

Here is a simple formulation for a body cream scrub based on your request for a 1 kg batch. This formula uses basic ingredients to create a stable cream base with exfoliating particles.

Ingredients:

• Water: 750 g
• Glycerin (USP/Food Grade): 50 g (5%)
• Mineral Oil (Paraffinum Liquidum) Light (26cst): 50 g (5%)
• Easy Cream Maker™: 20 g (2%)
• CreamThick™ (Hydroxypropyl Starch Phosphate): 20 g (2%)
• Walnut Scrub, medium sized (20-40Mesh): 100 g (10%)
• Mild Preserved™ COS: 10 g (1%)

Instructions:

1. In a container, combine Water, Glycerin, and CreamThick™. Stir or mix until CreamThick™ is fully dispersed and the mixture starts to thicken. No heating is required.
2. In a separate container, mix Mineral Oil Light and Easy Cream Maker™ until well combined.
3. Slowly add the oil mixture from step 2 into the water phase from step 1 while stirring continuously. Continue stirring until a smooth cream texture is formed. Avoid using high-speed blending, as this can damage the cream structure.
4. Add Mild Preserved™ COS to the cream and stir to ensure it is evenly distributed.
5. Finally, add Walnut Scrub to the cream base. Stir gently to disperse the scrub particles evenly throughout the cream. Be careful not to over-mix.

This formula provides a basic cream scrub. You can adjust the percentage of Walnut Scrub depending on the desired exfoliation level (typically 5-15%). Ensure the cream base is thick enough to suspend the scrub particles and prevent settling over time. Adding Glycerin helps provide slip for easier application and rinsing.

• Note: Always perform a small test batch before making a large quantity. Adjustments may be needed based on the specific properties of the ingredients used.*