Haircare Recipes

Hello research team Please ask for advice on ingredients and how to mix shampoo. and leave on conditioner as detailed below: 1.SLES 8-12% 2. 2 -5% 3.saliquard EZ 0.2-2% 4. 1-2% 5. . 3% 6. 7. 0.7-1% 8 9. 10. / (rose tea)1% 11. 3% 12. for leave on 1.Pro , 3% 2. ,3% 3. ,3-5% 4. ,1% 5.penoxy ,1% 6. ,1% 7.esstential oil,1% 8. 3.5% 9. (light non greasiness)3% 10. 3% Thanks in advance.

Hello, shampoo 1.SLES 8-12% 2. 2-5% 3.saliquard EZ 0.2-2 % 4. 1-2% 5. . 3% 6. 7. 0.7-1% 8 9. 10. / (rose tea)1% 11. 3% 12. according to the formula that members have informed. The study team recommends as follows. 1. If possible, avoid using it. /sulfate group detergent such as SLS, SLES, which can irritate the skin. Including many users, the problem continues. [Members can find more information from the internet] 2. If members choose to use SLES in this formula together with is not required. acts as a viscous to the texture of the shampoo because SLES when mixed with will have a viscosity in itself. Not enough as needed Members can add salt to the recipe a little bit (0.25-1.0%) to adjust the thickness of the recipe. which will be cheaper to use 3. Please cut the skin care ingredients in this formula is is out. Using any skin care ingredient in the rinse formula. will be of little benefit This is because these ingredients will be washed away immediately. Haven't been able to give any benefits to the skin yet. For leave on 1.Pro ,3% 2. ,3% 3. ,3-5% 4. ,1% 5. ,1% 6. ,1% 7.esstential oil,1% 8. 3.5% 9. (light non greasiness)3% 10. 3% Please tell me the recipe is 100% complete.

Thank you staff -my skin recipes. In case of shampoo, if you don't use SLES, you should put it. is the quantity in this formula? Or which one do you use instead? In the case of Leave on, this formula wants to be fully nourished. -free tongue will add the other 3% remove the butter and the rest is water. both shampoo and leave On what range should the ph value be? Please disturb the research team again. Thank you very much.

Hello, in case of shampoo. If not using SLES, you should put in this formula. Or which one do you use instead? won't be as clean as SLES In this formula, focus on the foaming function rather than cleaning the hair. The team recommends members to choose these various detergents that can be cleaned well: [Recipe pH adjustment required - see ingredient detail page for more details] ] [needs adjustment Recipe pH - Please see ingredient details page for more details] ] and Cannot bubble as much but much cheaper. both shampoo and leave On what range should the ph value be? 5-6

Hello and thank you. Research team. I have received the ingredients but still wondering and feel that some ingredients are missing to make clear shampoo. according to the formula below 30% 1% 0.8% 0.7% 5% DI, the rest is 100%. The concern is that 1.zinc will not spread because does not help restructure 2. insoluble in non-oil. And in the formula, if you add oil, it will turn into a cloudy shampoo. I want to know if the team has a mixing technique to recommend or what substances do I need to add to get clear shampoo? Thanks in advance

Hello, the formula cannot be made clear. The main reason is is insoluble in formulation. but is the distribution in the formula When there is any powder scattered in the formula instead of dissolved in the formula It will make the light unable to shine through the formula. If there is no turbidity In this formula there is also that can cloud the formula. But there is a workaround such as using help solve compatible with water formulations. By making it clear The main problem is

Hello research team Now I have tried the recipe and found that the zinc is precipitated and there is a separate layer of the herbal juice added. including chemical odor and insufficient viscosity In terms of quality, I also find that my hair is tough (but I don't get tangled), my hands are wrinkled quickly. I want to know what should be added or reduced in order to 1. To reduce hardness (soft) 2. Odor that masks chemicals 3. Adjust the viscosity 4. Including zinc that does not precipitate. 5. If you want more bubbles, what should be added? The shampoo that comes out has a pH of 5, the volume of water mixture is 69%. Shampoo base Lauryl + coca 23% 2% 1% Thanks in advance.

Hello 1. Let's get the hardness down. (soft) use group ingredients hair-conditioning 2. The smell that masks the chemicals use to deodorize the formula or any more, remove the smell of the ingredients. 3. Adjust viscosity 4.Including non-precipitated zinc, use in a larger proportion so that floats in the formula, does not precipitate. 5.If you want more bubbles, what should be added? Use that can give more foam. + provides low foaming which the team has learned. I've been notified before.

Thank you research team. Please ask a few more questions if you use and put or not? The amount to put should not be more than how many %? Thank you in advance

Hello will cause Smell is weaker as well, usage rate is not limited. Use according to the intensity of the desired scent. But please be aware that can irritate the skin, meaning higher rates of use. It increases the risk of skin irritation even more. Please try starting at 1% and adjust up-down. according to the intensity of the desired scent Fragrance brands such as Bath and Body Works are used at approximately 5% of most [ Each scent has a strong/soft scent. It's different]