Cosmetics Formulation Development

Hello, the team thinks that from the original formula, there are already high amounts of various ingredients. To add more ingredients to the recipe Should have to reduce the proportion of ingredients to some. Recommended study team Try the same formula after 6 weeks, report the reversed results, the satisfied side and the dissatisfied side. In order for the team to recommend tailoring the formula to better suit the skin's response.

Okay, so I'll explain the blending to the staff, please tell me if it's correct or not. Water phase 1. 2% 2. 3% 3. 2% 4. 10% 5. 12% 6. 3% 7 . 10% 8. 3% 9. 3% 10. 2% 11. 2% 12. 5% 13. 2% 14. 24% Oil phase 15. 2% 16. 5% 2% Meat binder cream 2% 3% 1% Method A. Mix all parts of water together (1-14) Stir well until dissolved, mixed in 14 B. Bring the oil mixture together (15 + 16) and heat about 50 degrees to make mixed with other oils C. apply ™ Add to A, stir and mix. A+B together people continuously You will get the cream in 1-10 minutes, then add together. Questions. 1.Additional substances added to the original formula that Staff adjusted to have 2% , 2% and 2% by choosing to reduce 12 % left, is that ok? 2. Is the method of all the ingredients correct? Yes except must be mixed after all ingredients have been combined. until it becomes a cream, right? 3. and how and when to mix? 4. Details of says that if there is water in the recipe, you should add 0.2% and do not use with - Required EDTA[/ 0.2% in the formula? out of the formula? I don't want to take it out either. But if you don't remove it and use it together, is it dangerous?

I would like to amend the method of mixing item A. I am afraid that the staff doesn't understand. "Bring all the water parts together (1-14) and stir until dissolved" is the correct one. And I would like to ask another question in the oil phase mixture that we need to use heat to melt. body can it be heated?

Hello How to mix A.Bring all the water parts together (1-14) and stir until dissolved in 14 B.Bring the oil mixture together (15+16), heat about 50 degrees to make dissolved with other oils C. ™ Add to A, stir well and mix A+B together, stirring continuously. You will get the cream in 1-10 minutes, then add Blend steps are correct except No melted with because it is not heat resistant, please warm it alone to melt oil and then mixed with the water to create the gel/cream texture with already (meaning when A is done, add into A, blender/stir until gel-cream texture. Then gradually add each part of the oil by heat until the liquid melts into oil. Gradually add it to the gel cream. 1.Substances added to the original formula that Staff modified to include 2%, 2% and 2% by choosing to reduce 12% left ok? can do this? 2. Are all the ingredients method correct except ? must be mixed after all the ingredients have been combined. until it becomes a cream, right? is a part of the oil. to be able to add to the cream You can blend/stir together, you don't need to wait for the last step, usually adding the ingredients in the last step. This is because the formula uses heat to combine the cream. which in this formula No heat is used to solder the cream ( can run without heating) 3. and How and when to mix it? You can add it according to the oil part. 4. details of says that if there is a water part in the recipe, you should add 0.2% and do not use with - Required EDTA[/ 0.2% in the formula? out of the formula? I don't want to take it out either. But if you don't remove it and use it together, is it dangerous? Choose only between or Comments from the team. If you just want to keep your skin healthy, use it. which works fine. But if you want to have clearer skin Use , but the disadvantage is that it is more expensive. and does not have the same skin-healthy research results. [There is no substitute for this ingredient. Every ingredient has its own unique properties.]

If remove Exit and select Required. into the formula as well? and if you have to fill When should I check?

Hello, the formula with of any kind is recommended to add , it can be dissolved in water.

See how to mix sunscreen formula. cream SPF49/PA ++++ from the web formulation center on YouTube, the last episode. I saw that it was able to add other substances, so I wanted to ask the staff if it could be added. and Can I add it and in what step do I need to add it? If you can add the substance that you asked, please ask the staff to explain the mixing process for me.

More from the above post. I would like to add 2 more characters and in sunscreen formula cream SPF49/PA ++++ can I add it? And how much quantity must be added in any step?

Hello, so I want to ask the staff if they can add and Can I add it and in what step do I need to add it? If you can add the substance that asks, please ask the staff to explain the mixing process for water-soluble ingredients such as Safe-Be and can be mixed with the water in the formula, or if the formula uses heat to mix. and some of these ingredients like is not heat resistant. so that it can be added to the recipe in the last step and blended or to combine can tolerate heat well It is mixed with the water at the beginning) However, it is recommended to consider appropriateness. To add these skin care ingredients Into the sunscreen formula as well because of the sunscreen formula. Usually want to emphasize lightness, not greasy if too much skin nourishing ingredients are added. May make the formula heavy - gooey. and not suitable for use during the day more from above post I want to add 2 more characters is and in sunscreen formula. cream SPF49/PA ++++ can I add it? And how much quantity must be added in which step? is the same answer? Please kindly understand how to mix. Soluble ingredients or oil soluble ingredients to the formula. In the basic mix at there will be an explanation If members understand, they will know in what step this ingredient will be added to the recipe.

Can you produce cream for me? The ingredients that the staff has adjusted for me.