Haircare Recipes

(Viscosity in shampoo/liquid soap) ( , Liquid) Calcium Hydroxide (99% / Food Grade) sterile if purchased as follows, with existing Coconut Di amide (CDE) Plantacare 1200 ( ) Cocamido Propyl Betain (CAPB) Vegetable e (VG) ask if you want to do it. 2. Cat bath shampoo extra gentle Does not cause any irritation And make the hair beautiful, soft, smooth, not tangled, healthy, not falling out. Is it enough to do it? Or is there any substance that should be bought more? Which one should be cut out, please advise. Thank you.

Hello, recommend 25% Water 74% 1% ( ) would be the easiest recipe. be gentle and make good bubbles

Ask for more information. Follow the instructions and it's not viscous. 25% Water 74% 1% This formula can measure ph, ph7 is still not viscous. When used to remove grease stains, it cleans well, but hands are a bit dry. Can you fix it here? and try another formula 20% 5% 5% water 70% add citric acid, adjust ph 7 people and not viscous at all, add 1% sugar trick. Now it's very viscous, like gel. But why use it to clean it? with not completely cleared Can this formula be adjusted?

if add into both formulas, will it be difficult to wash off? So what are the good or bad effects? and if you can add How many % should I add? Or should I add ? is included. Please advise, thank you.

Hello 25% Water 74% 1% This formula can measure ph, ph7 is still not viscous. When used to remove grease stains, it cleans well, but hands are a bit dry. Can this be fixed here? Let it sit for 2-3 days before. In this recipe, the thickening will gradually occur over time. If it's still not thick, try adding 0.3% salt. Hand problem. Dry, can do 2 things: 1. Reduce the rate of use. OR 2. Add a Conditioner for example , then try again. Formula 20% 5% 5% water 70% add citric acid, adjust ph 7 people and not viscous at all, add 1% Now, it's very viscous, like a gel. But why use it to clean it? with not completely cleared Can this formula be adjusted? Thanks Cleaning performance is not good enough because selected does not have high cleaning efficiency. recommend more 5% in this formula will help a lot in cleaning efficiency. if add into both formulas. Will it be difficult to wash off? So what are the good or bad effects? and if you can add How many % should I add? It will be more difficult to wash out. But will cause a slightly slippery feeling on the skin. which may or may not like It depends on the person can add , which will provide good foaming and cleanliness. but has to be put 0.1% prevents precipitation.

Thanks for the advice. Ask more is different from How are you? Can they be used interchangeably? and if filling in the recipe, would it be good? Thank you.

Hello is different from how are you? Can they be used interchangeably? gives more bubbles. more clean and more likely to irritate the skin In the case of using a high rate , Less foam, less cleanliness. But if the pH is adjusted accordingly, it is with very low skin irritation. (Because of the low cleaning efficiency as well) can be added to adjust the texture during can use

Hello, please ask for the recipe that I am making now. 360 grams of Ro water mixed with already Set aside, then divide the accommodation water into 40 grams, add warm and stir. Set aside to cool and then add 18 g Mix together, set aside, then add fine powder 18g into the water (320g water), stir well to get a milky white color, then pour 2 containers together. then people get together again Here it will start clear and liquid like water, add 6 g. Matches. Arrived at the gist of the question. Add 24 g. When adding color, it will turn cloudy like a paste. Stir it together. Do the first round, gradually become clearer. The poor can be stirred. Clear formula, similar to Ro water. Use it all. Do it for the 2nd round. People will be cloudy like a paste. The last step, add 3 g of sugartrick, pour 25.8 g of Ro water, boil, dissolve and mix, stir until viscous, and it's done. In the recipe, no color and smell are added. The ph is 6.5. The question is, are all the substances that I use? Is it compatible? and if i reduce will it be clearer than before? Another question is if adding down with in the formula, will it be more gentle? Can it fit with the formula? If compatible, which one is better? Please advise, thank you.

Hello when found produce turbidity. and hard to come back clear If the member's formula wants to focus on transparency Suggest other options like which is the easiest to use. compared to Other types of or, if convenient, in powder form (Which will take time to spin to dissolve) may be used. , is a very easy option. and not expensive