Browse Questions and Answers

Avg response: 24 Hrs
Minimum 3 characters for search

20 of 14234 results

I want to make a spray tonic to reduce hair loss, dandruff, and oiliness. I plan to use the following ingredients: 1. Lavender Water 60.00% 2. Dandruff-Clear™ 0.10% 3. Calcium Pantothenate 3.00% 4. Biotin Express™ 1.00% 5. Sebum-Reg 2.00% 6. Pure Keratin™ (Natural, Sheep Wool) 2.00% 7. N-Acetyl Cysteine 5.00% 8. Vitamin B6 (Pyridoxine Hydrochloride) 2.50% 9. Ectoine (from Bio-fermentation) 2.00% 10. Melatonin Forte™ 1.00% 11. Hydrolyzed Silk Protein (Sericin, Powder) 0.50% 12. Pure MSM™ (Methylsulfonylmethane) 3.00% 13. Laurocapram (Water Soluble) 2% 14. Ethyl Alcohol 15.9% I plan to mix according to these steps: A. Warm Lavender Water to make Dandruff-Clear™ dissolve easier. B. Cool A to room temperature, then mix in ingredients 3-8, then check pH and adjust to 5.5-6. After that, mix in the remaining ingredients. My questions are: 1. Is the mixing procedure correct? 2. Are there any ingredients that might cause an unpleasant, pungent odor? 3. Will Calcium Pantothenate at 3.00% cause stickiness? Which ingredients might cause stickiness? 4. Lavender Water already contains a preservative. Does this formula need additional preservatives because it contains Hydrolyzed Silk Protein (Sericin, Powder)? 5. Is Ethyl Alcohol at 15.9% sufficient to help the texture feel lightweight upon application?

Cosmetics Spray Hair Loss Reduction Oil Control Texture Dandruff Treatment
Posted by aoonjung
Read More

What are the differences between Reed Diffuser Base Type 1 and Type 2?

Cosmetics Reed Diffuser Diffuser Base Scent Comparison Fragrance Base Ingredient Comparison
Posted by e.aquaholic
Read More

Hello, I would like to consult about mixing 100% fragrance oil or [url=http://www.myskinrecipes.com/shop/53-natural-essential-oils:1uev07v1]Essential Oil[/url:1uev07v1] for dropping into an aroma diffuser (atomizer). Can it be mixed and used directly, or should a [url=http://www.myskinrecipes.com/shop/328-%E0%B8%AA%E0%B8%B2%E0%B8%A3%E0%B8%95%E0%B8%A3%E0%B8%B6%E0%B8%87%E0%B8%81%E0%B8%A5%E0%B8%B4%E0%B9%88%E0%B8%99-fragrance-fixative:1uev07v1]fragrance fixative[/url:1uev07v1] be used to help the scent disperse for a longer time? Do you have any recommended formulas? Thank you very much.

Cosmetics Diffuser Fragrance Oil Fragrance Fixation Usage Method
Posted by christina.bekenn
Read More

I want to make a herbal face mask cream using cream thickeners like Sepigel (Sepinov EMT10) and Satin Cream Maker. When I added Centella Asiatica powder, it dissolved and became liquid. How can I fix this? I want a thick, dense herbal face mask cream texture.

Cosmetics Cream Texture Viscosity Ingredient Interaction Thickener
Posted by justfaidindyeye
Read More

What is Isoambrettolide, what is it used for, and how is it related to perfume?

Cosmetics Fragrance Fragrance Diffusion Fragrance Fixation Fragrance Formulation Long-lasting
Posted by pisveelove
Read More

Could you please recommend ingredients that help kill viruses or bacteria for use in a shower cream formulation?

Cosmetics Shower Cream Antibacterial Preservation Microbial Contamination Challenge Test
Posted by pornchuda.sdc
Read More

Based on the provided formula for a hair serum consisting of natural oils and silicones, which includes Cyclopentasiloxane 1%, Dimethicone 1%, Cyclomethicone 1%, Argan Oil 10%, Almond Oil 5%, Silicone Blender 3-4%, and SiliSolve Plus 0.5-1.0%, what adjustments (addition or reduction) should be made?

Cosmetics Serum Formulation Examples Ingredient Ratio Texture Anhydrous Formulation
Posted by sunshine.arada
Read More

Regarding **Copper Peptide** that is already dissolved and sold by the shop at 1000ppm, equivalent to 1% in solvent, and the shop recommends using it at 1-3%: Does this mean that even though it is already dissolved at 1%, it still has to be further dissolved to get a concentration of 1-3% again? We cannot use 1000ppm to apply directly onto the skin as 100%, correct? When compared with the powder form, it has to be dissolved in solvent to reach the recommended concentration of 0.01-1%, and if dissolved to 1%, it can be applied directly onto the skin as well. So it should not be different from the one the shop has already dissolved at a ratio of 1000ppm. Therefore, the 1000ppm one should also be able to be applied directly onto the skin, correct? Thank you.

Cosmetics Active Ingredient Concentration Amount Calculation Dilution Solution Powder
Posted by chatnaphat.n
Read More

I would like to know if there are any substances that can help reduce the alcohol content in perfume without altering or changing the fragrance. Please advise. Thank you in advance.

Cosmetics Perfume Solvents Fragrance Stability
Posted by pisveelove
Read More

Can Zinc Sulfate be used to make a cream for reducing melasma? If so, the ingredient description states that 10-15% concentration is effective, but the recommendation advises not exceeding 5% to avoid irritation. What percentage should be used?

Cosmetics Cream Melasma Treatment Usage Percentage Skin Irritation Regulatory Compliance
Posted by acepream56
Read More

Can a Magnetic Stirrer be used to mix cream (in batches less than 1 liter) to achieve a smooth texture, instead of a Homogenizer? Is it powerful enough for this purpose?

Cosmetics Cream Texture Emulsion Mixing Procedure Texture Modification
Posted by touytong007
Read More

I want to make a scrub using the following ingredients: * Coffee grounds * Tamarind paste * Shea Butter Do I need to add a preservative? If so, please recommend the name and usage percentage of a suitable preservative.

Cosmetics Scrub Preservation Microbial Contamination Usage Percentage High Water Content
Posted by sunshine.arada
Read More

I would like to inquire about ingredient recommendations: 1. I need a binder for a powder formulation, specifically looking for OCTYLDODECYL STEAROYL STEARATE. Could you recommend a suitable alternative available at MySkinRecipes? 2. For Dimethicone/VINYL Dimethicone Crosspolymer, could you recommend which product available at MySkinRecipes would be suitable? 3. For VINYL DEIMETHICONE/METHICONE SILESQUIOXAN CROSSPOLYMER, I am interested in POLYMETHYSILESSQUIOZANE. Could you provide recommendations for these?

Cosmetics Powder Binder Gel Soft-Focus Texture
Posted by purchase
Read More

I would like to inquire about solvents that can be used in mouth spray and mouthwash to help dissolve flavors in the formula to achieve a clear formula. Do you have any recommendations?

Cosmetics Mouth Spray Mouthwash Solubility Clarity Solubilizer
Posted by puntipa.cmh
Read More

I would like to know what percentages to add/reduce for each ingredient to create a wax-like texture that can be applied to an animal's body to remove grease stains and then washed off. The ingredients I have are: 1. Glycerin, 2. SLSE, 3. Iso Paraffin, 4. Coconut Oil, 5. Fragrance (not yet chosen). I have no knowledge of formulation. Could you also suggest alternative formulas? The product I used before had a wax-like cream texture that was applied to areas with grease stains on the animal's body, and the stains came off when washed.

Cosmetics Pet Application Cream Easy Rinsing Degreasing Wax Texture
Posted by isaicequeen
Read More

How can I achieve a honey color for a Gel Cream formulation? What colorants should be mixed into the formula?

Cosmetics Gel Cream Cream-gel Texture Coloring Color Adjustment
Posted by tassaporn
Read More

Hello admin, I have some questions about making alcohol-free perfume. Based on previous forum discussions and comparing ingredients to find a solvent alternative to [url=http://www.myskinrecipes.com/shop/%E0%B8%AA%E0%B9%88%E0%B8%A7%E0%B8%99%E0%B8%9B%E0%B8%A3%E0%B8%B0%E0%B8%81%E0%B8%AD%E0%B8%9A%E0%B9%80%E0%B8%84%E0%B8%A3%E0%B8%B7%E0%B9%88%E0%B8%AD%E0%B8%87%E0%B8%AA%E0%B8%B3%E0%B8%AD%E0%B8%B2%E0%B8%87%E0%B8%84%E0%B9%8C/706-alcohol-%E0%B9%81%E0%B8%AD%E0%B8%A5%E0%B8%81%E0%B8%AD%E0%B8%AE%E0%B8%AD%E0%B8%A5%E0%B8%A5%E0%B9%8C.html:2y06ivhv]alcohol[/url:2y06ivhv] and avoiding fixed oils, I found 2-3 ingredients that evaporate quickly, such as 1. [url=http://www.myskinrecipes.com/shop/%E0%B8%8B%E0%B8%B4%E0%B8%A5%E0%B8%B4%E0%B9%82%E0%B8%84%E0%B8%99-silicone/1492-dimethicone-1secs.html:2y06ivhv]Dimethicone 1Secs[/url:2y06ivhv] and 2. [url=http://www.myskinrecipes.com/shop/%E0%B8%95%E0%B8%B1%E0%B8%A7%E0%B8%97%E0%B8%B3%E0%B8%A5%E0%B8%B0%E0%B8%A5%E0%B8%B2%E0%B8%A2/228-isododecane.html:2y0B6ivhv]Isododecane[/url:2y0B6ivhv]. I would like to know: 1. Can these two ingredients be used as a base instead of [url=http://www.myskinrecipes.com/shop/%E0%B8%AA%E0%B9%88%E0%B8%A7%E0%B8%99%E0%B8%9B%E0%B8%A3%E0%B8%B0%E0%B8%81%E0%B8%AD%E0%B8%9A%E0%B9%80%E0%B8%84%E0%B8%A3%E0%B8%B7%E0%B9%88%E0%B8%AD%E0%B8%87%E0%B8%AA%E0%B8%B3%E0%B8%AD%E0%B8%B2%E0%B8%87%E0%B8%84%E0%B9%8C/706-alcohol-%E0%B9%81%E0%B8%AD%E0%B8%A5%E0%B8%81%E0%B8%AD%E0%B8%AE%E0%B8%AD%E0%B8%A5%E0%B8%A5%E0%B9%8C.html:2y06ivhv]alcohol[/url:2y06ivhv]? 2. Can these two ingredients be used alone, or do they need to be mixed with other ingredients (like water or [url=https://www.myskinrecipes.com/shop/oil-in-water-high-hlb/718-flora-solve-%E0%B8%9C%E0%B8%AA%E0%B8%A1%E0%B8%99%E0%B9%89%E0%B8%B3%E0%B8%AB%E0%B8%AD%E0%B8%A1%E0%B9%83%E0%B8%99%E0%B8%99%E0%B9%89%E0%B8%B3.html:2y06ivhv]FloraSolve[/url:2y06ivhv])? 3. Can the [url=http://www.myskinrecipes.com/shop/328-%E0%B8%AA%E0%B8%B2%E0%B8%A3%E0%B8%95%E0%B8%B6%E0%B8%87%E0%B8%81%E0%B8%A5%E0%B8%B4%E0%B9%88%E0%B8%99-fragrance-fixative:2y06ivhv]fragrance fixative[/url:2y06ivhv] from your store dissolve in the above ingredients? Additionally, regarding stabilizers to prevent degradation, I am interested in the following: 1. Butylated Hydroxytoluene (BHT), 2. [url=http://www.myskinrecipes.com/shop/%E0%B8%AA%E0%B8%B2%E0%B8%A3%E0%B8%81%E0%B8%B1%E0%B9%88%E0%B8%99%E0%B9%80%E0%B8%AA%E0%B8%B5%E0%B8%A2/1332-pentaerythrityl-tetra-di-t-butyl-hydroxyhydrocinnamate.html:2y06ivhv]Protec™ OX[/url:2y06ivhv], and 3. [url=http://www.myskinrecipes.com/shop/%E0%B8%AA%E0%B8%B2%E0%B8%A3%E0%B8%81%E0%B8%B1%E0%B9%88%E0%B8%99%E0%B9%80%E0%B8%AA%E0%B8%B5%E0%B8%A2/1333-benzotriazolyl-dodecyl-p-cresol.html:2y06ivhv]Protec™ UV[/url:2y06ivhv]. I would like to know: 1. Which of these ingredients is suitable for preventing the degradation of [url=http://www.myskinrecipes.com/shop/319-%E0%B8%AB%E0%B8%B1%E0%B8%A7%E0%B8%99%E0%B9%89%E0%B8%B3%E0%B8%AB%E0%B8%AD%E0%B8%A1:2y06ivhv]perfume[/url:2y06ivhv] (when making rollerball and dabber perfumes, in both opaque and clear packaging)? 2. Can the above ingredients dissolve in DPG? 3. Can all three ingredients dissolve in [url=https://www.myskinrecipes.com/shop/search?search_query=dimethicone&orderby=position&orderway=desc:2y06ivhv]Dimethicone[/url:2y06ivhv] 1sec and [url=http://www.myskinrecipes.com/shop/%E0%B8%95%E0%B8%B1%E0%B8%A7%E0%B8%97%E0%B8%B3%E0%B8%A5%E0%B8%B2%E0%B8%A2/228-isododecane.html:2y06ivhv]Isododecane[/url:2y06ivhv]? Thank you for your answer.

Cosmetics Perfume Alcohol-Free Formulation Solubility Stability Fragrance Fixation
Posted by smudhja.ns
Read More

Can GlucoBright (Acetyl Glucosamine) be mixed at up to 8% in a serum without causing side effects?

Cosmetics Serum Usage Percentage Skin Irritation Acne Treatment Exfoliation
Posted by patarapolchuon
Read More

I am developing a 2-in-1 body wash and shampoo formulation. The mixture separates after about 20 hours, as shown in the attached image. **Formulation Ingredients:** 1. `Sulfate Free Shampoo Base` 25% 2. `Polyglyceryl-4 Caprate` 5% 3. `Encapsulated Salicylic Acid` 5% 4. `WaterLock` 1% 5. `Condi-B5` 1% 6. `Mild Preserved Eco` 1% 7. `Fragrance` 1% 8. Water up to 100% **Mixing Procedure:** Add ingredients 1, 2, 3, 6, 4, 5, and 7 in order and mix manually. I have the following questions: 1. The mixture separates after standing for about 20 hours. How can I fix this? 2. The foam feels a bit low. Can I add `Foaming Tea` 5%? How should I incorporate it with the existing ingredients? 3. Comparing the current combination of `WaterLock` 1% and `Condi-B5` 1% with `Hair Wheat Protein` 1%, which is likely to provide a softer feel to the hair without leaving the skin sticky? 4. Comparing the effectiveness of `Encapsulated Salicylic Acid` 5% versus `Dandruff-Clear` 0.1% for treating dandruff and acne. Should I use them together, and if so, at what concentrations? Currently, I have to wash my hair daily; otherwise, my scalp becomes oily, itchy, and dandruff appears very easily, even if I skip washing for just one day. 5. My hair breaks and falls out very easily. Are there any additional ingredients you would recommend adding to the body wash/shampoo, or should I address this with a separate product?

Cosmetics Gel Shampoo Phase Separation Dandruff Treatment Acne Treatment
Posted by sunsleep0
Read More

Regarding the following cosmetic formulations: Cleansing gel (for face eyes lip) Water 82% Poloxamer 184 10% Betaine 3% Allantoin 0.5% 1,2-Hexanediol 3% Critic acid ปรับph Mild Preserved Eco 1% Xanthan Gum 0.5% Cleanser Water 67% Sodium cocoamphocetate 20% Panthenol 5% Betaine 3% Allantoin 0.5% 1,2-Hexanediol 3% Critic acid ปรับph Mild Preserved Eco 1% Xanthan Gum 0.5% Serum Water 86.9% Panthenol 5% Ceramide Complex (Water Dispersible Powder) 1% Betaine 3% Madecassoside-80 (Centella Asiatica Extract) 1% Allantoin 0.5 Amitose goa 0.1% DMI 3% Mild Preserved Eco 1% Xanthan Gum 0.5% If these formulations can be made, please provide the mixing steps. Thank you.

Cosmetics Mixing Procedure Gel Facial Cleanser Serum Solubility
Posted by bbaekhyunee0405
Read More