Browse Questions and Answers
Avg response: 24 HrsFilter Questions
20 of 14238 results
In a peel-off mask powder formulation, if 1-20% is the main active ingredient, plus color and fragrance, what ingredients typically make up the remaining 80-99% to form the powder base?
Regarding hair conditioner formulations, can these formulas be mixed? **Formula 1** * Poly-Conditioner Pro (30000 mPa.s) 3% * Panthenol (Pro Vitamin B5) 0.5% * Herbal oil extract 1% * Tween 20 1% * Herbal water 94.5% **Formula 2** * GuarCat™ Standard 1% * Panthenol (Pro Vitamin B5) 0.5% * Herbal oil extract 1% * Tween 20 1% * Herbal water 96.5% I would like to know if these two formulas will have sufficient viscosity, or if any additional ingredients are needed.
Regarding Grape Seed Oil, it is stated to have a shelf life of 1 year unopened and 6 months after opening. If this oil is mixed into a formula to create a finished product, and a preservative is added to that formula, how long will the finished product last? Can the product have a shelf life of 2-3 years by adding a preservative?
I purchased Alpha Arbutin switzerland and Safe B3 powders. I mixed them with distilled water according to the recommended percentages. After dissolving completely, can this mixture be used as a 'water essence'? Is it suitable for sensitive skin?
Based on the following two hair conditioner formulations, I would like to know if they will have sufficient viscosity and if any additional ingredients are required to achieve the desired thickness: **Formula 1** * Poly-Conditioner Pro (30000 mPa.s) 3% * Panthenol (Pro Vitamin B5) 0.5% * Herbal oil extract 1% * Tween 20 1% * Herbal water 94.5% **Formula 2** * GuarCat™ Standard 1 % * Panthenol (Pro Vitamin B5) 0.5% * Herbal oil extract 1% * Tween 20 1% * Herbal water 96.5% Will these two formulas provide enough viscosity, or do I need to use any additional ingredients?
Based on the following ingredient list, what are the functions of each ingredient and what type of product is this formulation likely to be? * Aqua * Zinc Oxide * Titanium Dioxide * Aloe Barbadensis (Aloe) Leaf Juice * Dicaprylyl Ether * Glycerine * Caprylic/capric triglycerides * Squalane * Triisostearin * Polyglyceryl-3 Diisostearate * Sorbitan Isostearate * Betaine * Glyceryl Caprylate * Gluconolactone * Sodium Hyaluronate * Leontopodium Alpinum Callus Culture Extract * Alchemilla Vulgaris Extract * Malva Sylvestris Leaf Extract * Melissa Officinalis Leaf Extract * Mentha Piperita Leaf Extract * Veronica Officinalis Leaf Extract * Achillea Millefolium Extract * Primula Veris Extract * Epilobium Fleischeri Extract * Ceramides 3 * Ceramides 6 * Phytosphingosine * Tocopherol * Bisabolol * Isostearic Acid * Stearic Acid * Alumina * Glyceryl Tribehenate * sodium benzoate
Can Chamomile Extract be added to lip balm?
I have a shampoo formulation using the following ingredients: * Glycerin * Guar gum * Water * Plantacare 2000 * Coco Glucoside * Sodium Lauroamphoacetate + Amphoteric (Mild-Wash) * Bai Mee Extract (สารสกัดใบหมี่) * Makham Di Khwai Extract (สารสกัดมะคำดีควาย) * Makrut Extract (สารสกัดมะกรูด) * Hydro Protein * GuarCat standard * Biotin * Zinc PCA * Vitamin B5 * Aloe Vera Extract * Potassium Cocoyl Glycinate * Potassium Cocoate * Sodium Cocosulphate + Water * Mild Preserve I would like to know if this shampoo formula can significantly reduce very oily hair, reduce dandruff and bacteria, and help with hair loss and flat hair. Should I reduce or add any ingredients? And what percentage should I add for each ingredient to be effective? The desired product should be 100% natural.
I have a proposed formula for a Vitamin C serum and want to know if it is feasible and what adjustments are needed. The goals are to make it suitable for FDA registration, stable, a gel-cream texture that can be used in a pump bottle, and to exclude Hyaluronic Acid. Here is the proposed formula: * L-ascorbic acid Ultra-Fine: 15.00% * Tocopherol: 2.00% * Ferulic Acid: 1.00% * DMI: 3.00% * 1,2-Hexanediol: 3.00% * Phospholipid: 2.00% * Phloretin: 2.00% * Ethyl Alcohol (99.9%): 4.00% * Pro Polymer (Gel Maker): 2.00% (Previously tried 1% and it was unstable, separated) * LipidSoft™ Lite: 5.00% * Protec OX™: 0.05% * Protec UV™: 0.05% * ActiveProtec™: 1.00% * Disodium EDTA: 0.20% * Phytic Acid: 0.20% * ClayThick™: 0.50% * Protec SQ™: 3.00% * Coenzyme Q10: 0.50% * Triethanolamine: 1.00% * Panthenol ExtraLite™: 1.00% (Cannot add 0.5% as listed on the website) * Purified Water: Balance to 100% Is this formula feasible? What adjustments are needed to achieve a stable gel-cream texture suitable for a pump bottle, ensure L-ascorbic acid stability (pH not too high), and meet FDA requirements, while avoiding a liquid/clear texture?
For nail polish remover, if we don't use Acetone, what other substances can be used as alternatives?
Could the R&D team please review the ingredient list below? The objective is to create an all-in-one serum/lotion that can brighten skin, reduce wrinkles, slightly control oil, and prevent acne. **Emphasis is placed on using full-dose, most concentrated ingredients as there are no issues with sensitive or irritated skin.** --- Ingredient List: * Safe-B3™ (Vitamin B3, Niacinamide) = 10% * GlucoBright™ (Acetyl glucosamine) = 4% * MSH White™ (Undecylenoyl phenylalanine) = 2% * Ume Extract (Anti-Glycation) = 4% * Yeast Radiance™ = 3% * Activated Resorcinol™ = 1% * Vitamin B6 (Pyridoxine Hydrochloride) = 2% * Phytosphingosine = 1% * Adenosine Liposome = 5% * Pisum Sativum Extract (Pea-Ex™) = 5% * Natural Bisabolol = 1% * Isopentyldiol = 5% * Dimethicone 1Secs = 5% * Light Lotion Maker = 4% * Phospholipid = 2% * Ethoxydiglycol = 2% * Mild Preserved Eco™ (Preservative-Free) = 1% * Disodium EDTA = 0.20% * Distilled Water = 42.8% Could you please provide guidance or suggest adjustments to the formula before proceeding with production?
I am formulating a sunscreen with the following ingredients and procedure: **Formula (%)** 1. SPF Protect Ultra II: 15 2. LipidSoft Lite: 15 3. ZnO powder: 3 4. TiO2 powder: 1 5. Polyethylene Wax: 3 6. Milk Lotion Maker: 3 7. Satin Cream Maker: 0.7 8. Phenoxyethanol SA: 1 9. H2O: 58.3 **Mixing Procedure** * Oil Phase: Combine 1 + 2 + 5 + 6 and heat until dissolved (85°C). * Water Phase: Heat 9 to the same temperature as the oil phase (85°C). * Slowly pour the water phase into the oil phase, blend until combined, then add 7. Once a cream texture is obtained, add 3, 4, and 8. I have encountered the following issues and questions: 1. A problem occurred as shown in the picture (looks like milk curdling). What is the cause and how can I fix it? 2. Is the amount of oil in the formula too high? I actually want to reduce the amount of 2 (LipidSoft Lite), but I am afraid it won't be enough to support physical sunscreen. I am not sure if 1 (SPF Protect Ultra II) can support physical sunscreen. Please advise. 3. Can Tribehenin, Butter Cream Maker, Cetearyl Alcohol, or any other ingredient replace 6 (Milk Lotion Maker) and 7 (Satin Cream Maker) in this formula? Thank you in advance for your guidance.
I would like to compare two serum formulations I am considering. Please advise on their compatibility and which one would be less sticky for my skin type. **Formula 1:** * Double Hyaluron Liquid 10% * Ectoin 2% * Niacinamide 5% * Glycosaminoglycans Complex 3% * Copper Peptide 3% * Adenosine Liposome 3% * Pure-EGCG™ (Green Tea Extract, 98% EGCG) 1% * Squalane 10% * Galactomyces Ferment Filtrate (aka. Pitera) 30% (I'm concerned using more might feel sticky) * Alpha Arbutin (Switzerland) 2% * Zinc PCA 1% * Laurocapram (Water Soluble penetration enhancer) 2% * Pro Polymer™ (Gel Maker) 0.5% * Ethoxydiglycol 2% * น้ำกลั่น 25.5% **Formula 2:** * HydroAlgae 2% * Sodium Lactate Plus 5% * Palmaria Palmata Extract 5% * Glycosaminoglycans Complex 3% * Plankton GP4G™ 2% * Creatine 100 1% * Niacinamide 5% * Ectoin 2% * Galactomyces Ferment Filtrate (aka. Pitera) 30% (I'm concerned using more might feel sticky) * Adenosine Liposome 3% * Zinc PCA 1% * Laurocapram (Water Soluble penetration enhancer) 2% * Pro Polymer™ (Gel Maker) 0.5% * Ethoxydiglycol 2% * น้ำกลั่น 35.5% **Questions:** 1. Can these two formulas be mixed together? 2. Which formula will be less sticky? **My Skin Type:** Combination skin, some acne near the eyebrows, slightly enlarged pores. I want to protect and strengthen my skin. Also, if I order from the website, can you mix it for me?
I would like to inquire about a solid perfume balm formulation. I tried making a batch, but it separated. Here is the formulation I used: **Part A:** * Petroleum Jelly 42.49% * Paraffin Wax 5.0% * Glyceryl Stearate 5.0% * Beeswax 2.0% **Part B:** * Fragrance 30.0% * Last Fix 15.0% * Phenoxyethanol 0.5% * Oil-soluble color 0.01% **Method:** Heat Last Fix until clear liquid, then mix Part B until uniform. Heat Part A to 75-80°C until melted, then pour Part B into Part A and stir until combined. I would like to know what caused the separation and how to adjust the formula to fix it. Thank you.
Please provide recommendations for a Treatment Lotion (น้ำตบ) formula. Is the current formula okay, or are there any adjustments, additions, or reductions needed? Please advise. The formula is as follows: * Chamomile Water (Anthemis Nobilis) 78% * Wakame Extract (Brown Sea Weed) 3% * Palmaria Palmata Extract 5% * WaterSoft 3% * Calendula Extract (Water Soluble) 5% * water lock 1% * Safe-B3™ 5%
I have questions regarding the ratios for making Room spray as follows: * What should be the ratio of water to Alcohol? * Are there many types of Alcohol used in Room spray? Some brands use PEG40, some use PPG-1-PEG-9. I'm not sure how they are similar or different. * Will the mixture of water, Alcohol, and Essential Oil separate? Is there a substance that needs to be added to prevent the separation between water and oil? * There are many types of fixatives and air disinfectants. Can you recommend or suggest which ones to use? Or can multiple substances be added, such as Benzyl Alcohol, Anice Alc, Benzyl Benzoate, Polysorbate 80, Benzyl Alc, etc.? Thank you very much.
Hello! I would like to ask about mixing Perfume. 1. Fragrance Oil (COCO Mademoiselle) 30% 2. Alcohol DEB96 70% If I want 30ml of Perfume, do I use 9ml of Fragrance Oil and 21ml of DEB96? Is this calculation correct? Will the ready-mixed Perfume have the same concentration as Eau de Parfum or last as long as Eau de Parfum (8-10 hours)? And does the mixed Perfume need to be macerated or left to sit before use? If I don't have a digital scale, can using a Syringe provide a similar level of accuracy? For packaging Perfume, does it need to be packaged in glass containers, or what types of bottles or plastic types can be used? Thank you. I'm a beginner, so I have quite a few questions.
I have a dry, flaky scalp with dandruff and want to include active ingredients for dandruff treatment and natural vitamins to nourish the scalp and prevent dryness, without causing allergies. I have the following questions: 1. If using a shampoo made from natural oils, can I add `Dandruff-Guard`? 2. What natural ingredients or vitamins are suitable for moisturizing the scalp?
I would like to understand the ingredients in this product. Please analyze the following list: * Water\Aqua\Eau * Dimethicone * Butylene Glycol * Glycerin * Trisiloxane * Trehalose * Sucrose * Ammonium Acryloyldimethyltaurate/VP Copolymer * Hydroxyethyl Urea * Camellia Sinensis (Green Tea) Leaf Extract * Silybum Marianum (Lady’S Thistle) Extract * Betula Alba (Birch) Bark Extract * Saccharomyces Lysate Extract * Aloe Barbadensis Leaf Water * Thermus Thermophillus Ferment * Caffeine * Sorbitol * Palmitoyl Hexapeptide-12 * Sodium Hyaluronate * Caprylyl Glycol * Oleth-10 * Sodium Polyaspartate * Saccharide Isomerate * Hydrogenated Lecithin * Tocopheryl Acetate * Acrylates/C10-30 Alkyl Acrylate Crosspolymer * Glyceryl Polymethacrylate * Tromethamine * PEG-8 * Hexylene Glycol * Magnesium Ascorbyl Phosphate * Disodium EDTA * BHT * Phenoxyethanol * Red 4 (Ci 14700) * Yellow 5 (CI 19140) Is it appropriate to provide this ingredient list for analysis?
I would like to create a serum for skin nourishment and **wrinkle reduction**, but I am unsure about ingredient compatibility. Could you please review the following formulation and provide suggestions, especially regarding how to achieve a non-sticky, comfortable texture? Here is the proposed formulation: * 4D Hyaluronic: 10% * Argireline: 10% * Safe B3: 5% * Panthenol: 1% * Pep- coll: 3% * Ectoin: 2% * Co enz Q. 10: 0.5% * Copper Peptide: 3% * Vitamin C ultrafine: 5% * Ferulic Acid: 1% * Vitamin E dl Tocopherol: 1% * Xanthan Gum: 0.5% * Skintight: 3% * Pitera: 20% * Dimethyl Isosorbide: 3% * Aqua: 32% Total: 100% I want a serum that is not sticky and feels comfortable on the skin. What adjustments should be made?
