Browse Questions and Answers
Avg response: 24 HrsFilter Questions
20 of 14228 results
I am trying to create a formulation using the following ingredients and percentages: * `Octyldodecanol`: 45.240 * `Hydrogenated Polyisobutene`: 28.270 * `Plandool-G`: 7.730 * `CERAMIDE COMPLEX`: 0.500 * `Super Fruit Oil`: 0.590 * `Tocopheryl Acetate`: 0.590 * `Cherry Kernel Oil`: 0.590 * `Phytosqualan`: 1.190 * `polyglyceryl-2 triisostearate`: 8.000 * `Ethylcellulose (100 cps.)`: 5.500 * `Microcrystalline Wax (Melting Point 77C, Medium)`: 0.300 * `Natural White Beeswax (USA, Melting 62C, Deodorized)`: 0.200 * `phenoxyethanol`: 0.500 My initial procedure involved mixing Octyldodecanol with Plandool-G, then heating the mixture to 85-90°C. After reaching this temperature, I added Ethylcellulose in portions. However, after the Ethylcellulose started to dissolve and I added the other ingredients, the mixture remained lumpy with undissolved particles, even after heating for 3 hours at 85-90°C. How can I fix this issue to achieve a smooth texture?
I would like to inquire about the use of `Anti-Sweat™ (Aluminum Chlorohydrate, 100% Powder)`. * Can this ingredient be incorporated into anhydrous (water-free) stick formulations? * What types of oils or bases does it disperse well in for such formulations?
I am making a cream emulsion and am encountering an issue where the silicone gel (`Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer`) appears as small droplets (like water droplets) within the cream texture. 1. How can I prevent these silicone gel droplets from forming? * I have tried adding `SiliSolve™ (PEG-10 Dimethicone)` at 2%, but the droplets are still visible. * My current method involves adding the silicone (1.5%) to the oil phase, heating it, and then mixing it with the water phase. * I am unsure at which step the silicone should be added. 2. Could you please provide the ratio of Cyclopentasiloxane to Dimethicone in the `Silicone Gel (Vinyl Dimethicone Crosspolymer)` product available on your website (referencing the product page: https://www.myskinrecipes.com/shop/th/volatile-base-silicone-elastomer/201-silicone-gel-vinyl-dimethicone-crosspolymer.html)?
For a dry powder mask intended for sale, is it necessary to include a preservative in the formulation? If so, what types of preservatives are suitable for a powder form?
I would like to make a lip product with a bouncing, jelly-like texture similar to Merrez'ca. Could you recommend an ingredient to achieve this texture?
How to dissolve `Capryloyl Salicylic Acid (LHA) Powder` at 0.5%? * Which oil should be used? * What amount of oil is needed for complete dissolution?
When heating ingredients such as Mineral Oil, Sunflower Oil, and Isododecane for cosmetic formulation, will they remain clear?
I would like to make a reed diffuser and plan to order the following two ingredients. Are they correct for this purpose? 1. Dipropylene glycol 2. Isopropylidenglycerin (Solketal)
Which type of Silica Silylate is suitable for creating "powdered water" formulations, where water is encapsulated within a hydrophobic powder?
Which grade of mica powder is the finest among the options A, B, C, and D? I plan to use it in serum and lotion formulations. I need a grade that provides a smooth, non-gritty texture and disperses well.
Which type of black Iron Oxide is recommended for use in a grey hair covering balm formulation, considering ease of dispersion and suitability for oil/wax bases?
Can raw materials/bases such as MOIST72™, Aloe Vera Gel (Lite), and Hyaluronic Acid (Nano Molecule, 2000daltons) be purchased and applied directly to the face for nourishment?
What is the SPF value of **JSM Cushion (compare to Jungsaemmool V2) (Light-Pink)**?
I want to develop a wash-off mask with a very thick, clay-like texture for skin masking. It should have a fresh, luxurious scent similar to the fragrance used in the lobby of The Quarter Ladprao hotel. How can I formulate this product, specifically regarding achieving the desired texture and scent, and incorporating whitening properties?
Are mixed amino acids (amino acid blend) available for sale in food grade?
I need clarification regarding the product Fullerene C60 (Encapsulated in Hyaluron, 500ppm). Does the `500ppm` stated on the product page refer to the concentration of fullerenes in the raw ingredient itself, or is it the resulting concentration in the final formula when using the recommended dosage of 0.2%? Additionally, if I want to achieve `0.05%` pure fullerenes in my final formula, what percentage of this ingredient should I include in the formulation? This distinction is crucial for calculating the actual percentage of fullerenes in our final product.
I want to make a body oil that turns milky when applied to the skin and is left on without rinsing. Which ingredient should I use to achieve this milky effect?
When formulating a shampoo, I find it feels quite dry/frizzly, especially since I want to avoid using the silicone group. I'm unsure which ingredient would be suitable. Can `Polyquaternium-7` be used to address this issue?
What is the difference between `Hydrolyzed Hyaluronic Acid` and `Sodium Hyaluronate Molecule 10K`?
I have a question about 8D Hyaluronic Acid. Are `Hydrolyzed Hyaluronic Acid` and `Sodium Hyaluronate Molecule 10K` the same as 8D Hyaluronic Acid? Also, the INCI list for 8D Hyaluronic Acid seems to have fewer than 8 items. Could you please clarify the composition and the INCI names included in the 8D blend?
