Browse Questions and Answers
Avg response: 24 HrsFilter Questions
20 of 14228 results
Recommend the perfect emulsifier to combine `Dimethicone` (like `Dimethicone 1000`) with oils in an anhydrous system to prevent separation in a hair or face serum. Please consider previous suggestions such as: * `Lauryl PEG/PPG-18/18 Dimethicone` (`SQ-SE 1200`) * `PEG/PPG-18/18 Dimethicone` * Silicone gels
Hello, Could you please confirm if the **L-Arginine** you sell is **pure cosmetic grade** and **suitable as a raw material for hair care formulations**? Please also provide the following documents showing purity and suitability for cosmetic use: * **COA** (Certificate of Analysis) * **SDS** (Safety Data Sheet) Thank you!
I would like to inquire about the following regarding `Microcrystalline Cellulose (Flavor Masking, Ultra Fine)`: * The purpose of use in formulations * The recommended usage rate (%)
# Cosmetic Product Development Process Please explain the R&D process for developing a cosmetic product from the initial stages until reaching the **Master Formula**, as well as the essential tools and equipment required for this process.
When formulating a scrub using `Oat Powder` as the primary scrubbing agent, what factors should be considered when choosing the formula base (e.g., cream, gel, or oil) to ensure it is suitable for the scrubbing agent? Additionally, please provide: * Formulation guidelines * A list of recommended ingredients for each type
Is `Hydrogenated Lecithin` food grade?
I have a question regarding `Red Iron Oxides EasyMix™`. The product page displays two different color swatches: `dark red` and `orange-red`. * Can these two colors be used interchangeably? * Are they separate products, or are they the same item?
The recommended usage rate is 1-5%. Can this percentage be used for `leave-on` products?
So far, the serum I am making doesn't seem to be absorbing well. It leaves a shiny, sticky, almost slight rainbow-like appearance that is "crinkly" (but not dry or crusty) when looking closely at the skin. It just doesn't sit right on the face and I am wondering what the issue is. I suspect `WaterSil™ 8/12` might be the cause. I’m considering: * Lowering the amount of `WaterSil™ 8/12` or switching to `WaterSoft™` (due to the smell of WaterSil). * Reducing the `X-Glycerin`. * Adding `Carbomer U21` to assist the `AnyGel™` (as sometimes when spreading on the face, it foams slightly, which does disappear). I would also like to raise the concentration of `SNAP-8`, but I'm unsure if it would make things worse. **Current Formulation:** * Distilled Water: q.s. to 100% (22.865g Adjusted) * `AnyGel™` (Dehydroxanthan Gum): 0.6% (0.30g) * `X-Glycerin` (Polyglycerin-10): 3.0% (1.50g) * Propanediol: 2.0% (1.00g) * `Aminomatte` (Sarcosine): 1.0% (0.50g) * Betaine: 1.0% (0.50g) * `Liquid Azelaic™` (Azeloglycina): 8.0% (4.00g) * `Safe-B3™` (Niacinamide): 5.0% (2.50g) * D-Panthenol Care (100% Liquid): 2.0% (1.00g) * `Micromul™` Kaempferol: 2.0% (1.00g) * Calendula Extract: 2.0% (1.00g) * `Ultra-Xylane™`: 3.0% (1.50g) * Decarboxy Carnosine HCl: 0.2% (0.10g) * `Micromul™` EGCG: 3.0% (1.50g) * `ActiveProtec™ OX` (Stabilized EGCG): 0.5% (0.25g) * `Pep-Calm™` (Palmitoyl Tripeptide-8): 2.5% (1.25g) * `Matrixyl Synthe'6` (Palmitoyl Tripeptide-38): 2.0% (1.00g) * `SNAP-8` (Acetyl Octapeptide-3): 4.0% (2.00g) * `WaterSil™ 8/12` (Water Gel Detackifier): 3.0% (1.50g) * `Mild Preserved HD™`: 1.0% (0.50g)
On your website, it is recommended to use a dose of up to 10%. * Does this mean 10% of the solution containing `SNAP-8`, or 10% of the peptide itself? * What is the percentage of peptide contained within the `SNAP-8` solution that you provide?
I am developing an O/W Emulsion lotion formula designed to have a light texture and fast absorption. I would like to know if the following formula is appropriate and how to calculate the correct amount of emulsifier. **Phase A** * `DI Water` — q.s. to 100% * `EDTA` — 0.10% * `Aloe vera Extract` — 2.00% * `Collagen` — 1.00% * `Hyaluronic Acid` — 0.20% **Phase B** * `Sweet Almond Oil` — 4.00% * `Isopropyl Myristate` — 2.00% * `Hydrogenated Polydecene` — 2.00% **Phase C** * `Sodium Polyacryloyldimethyl Taurate` — 0.80% * `Trideceth-10` — 0.40% **Phase D** * `Niacinamide` — 3.00% * `Alpha-Arbutin` — 1.50% * `Kojic Acid` — 0.50% * `Lactobionic Acid` — 2.00% * `mixberry Fruit Extract` — 1.00% **Phase E** * `Phenoxyethanol` — 0.80% * `Fragrance` — 0.20%
Can `CreamMaker EG™` (e.g. `Simulgel EG`) tolerate electrolytes?
I am looking for a milky serum formula that incorporates the following oils: * `Avocado Oil` * `Chia Seed Oil` * `Jojoba Oil` **Desired Benefits:** * Focus on whitening and brightening * Plumping and moisturizing effects * A lotion-like texture that is not too thick, but has enough viscosity so it doesn't run easily when applied to the face. Please recommend effective whitening active ingredients and provide a suitable formulation.
I am looking for an **Enzyme Cleansing Powder** formulation with the following requirements: * Focus on gentle exfoliation (cell turnover) * Promotes skin brightening * Leaves the skin feeling hydrated and not tight after washing
How is `Rosemary Extract` used in pet food applications? Please provide information regarding the following: * Application details * Usage instructions and recommendations * Recommended dosage
Is there a recommended ratio between `Gellan gum low acyl` and `Sodium chloride` for creating a **jelly to mist** texture? * I tried using 0.1g of `gellan gum` to 0.1g of `sodium chloride`, but it did not form a gel at all.
I would like to request some information. We are currently registering a surface cleaning product with the Thai FDA's Hazardous Substances division. The formulation uses `PE 1090 Preservative` as a preservative. As we need to provide the specific details of the ingredients in `PE 1090 Preservative`, I would like to know: * What is the ratio of `Phenoxyethanol` and `Ethylhexylglycerin` in this blend? * What is the function of `Ethylhexylglycerin`? In the FDA system, it is categorized as a "diluent" rather than a preservative. Please provide the technical data and advice on how to clarify this with the FDA. Thank you.
Are there ways to mattify the cosmetic look of a water-based gel serum made with `AnyGel™` and purified water while maintaining clarity and preventing the base from becoming opaque? My goal is to eliminate shine and gloss immediately after application. I have tried `AminoMatte™`, but it does not provide an instant cosmetic effect. Are there any clear, non-comedogenic, and water-soluble agents that offer: * Pore blurring * Mattifying effects
Can `WeightCare™ Reishi (Ganoderma) Mushroom Extract` (Code: 8670) be used for skincare?
I noticed that when adding `WaterSil™ 8/12` (Water Gel Detackifier) at 3.0% to a water gel-based serum, it produces a quite strong chemical and rubber-like scent. The serum contains many peptides, and the goal of using the detackifier is to make the formula less sticky. * Is there a clear alternative I could use that detackifies the serum but does not have such a strong scent? * Alternatively, should I use something like `Odor-Kill™`? Would it be effective in this case?
