Use Phospholipid 3%, leave on when dry. Found that there were some powder-like stains on the skin. Is there any way to mix it or any helper so that there is no stain like some powder left? Thank you according to the formula B3 5% GlucoBright 4% Phospholipid 3%. Remaining water EDTA 0.5% and Phenoxyethanol 1%
can add LipidSoft™ Moist 1-2% because from reading Phospholipid is also a secondary emulsifier. In itself, adding LipidSoft™ Moist about 1-2% to replace the oil. Can you recommend me if I get 1 or 2% should be enough?
[quote="austiname789"]Use Phospholipid 3% applied and left when dry. Found that there were some powder-like stains on the skin. Is there any way to mix it or any helper so that there is no stain like some powder left? Thank you according to the formula B3 5% GlucoBright 4% Phospholipid 3%. Remaining water EDTA 0.5% and Phenoxyethanol 1%
Hello, the formula doesn't contain oil, which makes Phospholipid is not fully dispersed. Add 3-5% oil to the recipe and continue blending for another 15-30 minutes Phospholipid will be able to dissolve into the formula itself.
can be added as LipidSoft™ Moist or any light lipidsoft substitute for oil Can I have 3-5%? You want to avoid stickiness or avoid using oils in formulas.
Hello, can you do it? But in the case of solving the formula Might have to spin for a while. Add to the original recipe and blend for 15-30 minutes until you see that Phospholipid dissolved into a creamy formula.