? but requires heat to melt. shea butter into oil Before mixing it with the formula 1. Aloe Vera Extract 3% 2. Cucumber Extract 3% 3. Wakame Extract 3% 4. Calcium Pantothenate 3% 5. Allantoin 0.4% 6. 1-2- Hexanediol 3% 7. Mild Preserved Eco 0.5% 8. MOIST72 3% 9. Satin Cream Maker 1.5% 10. Moringa Oil , shea butter water part The rest is 100%. Steps: Add the dissolved ingredients to the water (1,2,3,4,5,6,8), then add Satin Cream Maker Blend or stir until gel is obtained. If the gel is too liquid, add Satin Cream Maker in 0.5% increments, blend or stir until dissolved. and check the thickness of the meat That it is enough to want or not, then mix the oils together (if using Butter, heat to hot. to melt into oil) and add it to the prepared gel cream. Blend or stir to combine.and if you want to adjust the cream using Satin Cream Maker and use the mornings oil 5% + shea butter % instead of Moringa Oil 10%? How can I get a creamy texture that is quite thick
- if using Any Gel : can use no more than 2%, right? and if using 2%, use no more than 10% oil ?[/ quote] AnyGel was developed to create aqueous gel. It can be used in all liquid formulations. no restrictions but not developed To use to coordinate water - oil. It can help to coordinate water - oil. A little by using AnyGel in formula No other binders Should not contain more than 10% oil, ask for recipe. There is a very good chance of separating.Yes, because Satin Cream Maker was developed to help combine water-oil- if using Satin Cream Maker You can use up to 25% of the oil, right?That's right, if you don't have a blender, slowly add and stir well first. and then add more oilto mix different oils together. and fill in item 1 => must gradually add oil and stir Don't you just fill it up? ?If the formula doesn't use heat in the mix, add สารกันเสีย at first or last, but if using heat in the mixing process, it is recommended to add สารกันเสีย in the last step.3. Add Mild Preserved Eco last After refueling, right?Ceramide Available in 2 types. I don't know which type members are asking.4. To add Ceramide when do you add it? ?Can you do this? but may have to add Satin Cream Maker to 1.5-2.0% to synchronize. more shea butter has a buttery texture. need heat To warm it to melt into oil first.5. If you can use up to 25% oil and want a good coating, use shea butter up to 15% + Moringa Oil 10% is it possible? or should reduce the proportion of oil For example, it may cause too little water in the formula. ?Staff - MySkinRecipes