Browse Questions and Answers

Avg response: 24 Hrs
Minimum 3 characters for search

20 of 14236 results

I mixed a shampoo using the **Sulfate Free No Tear Shampoo Base** and it turned out very thick. Could you please review my formula and process? Here is the formula used: 1. **Sulfate Free No Tear Shampoo Base**: 30% 2. **Poly Conditioner Pro 400 m**: 3% 3. **WaterLock**: 1% 4. **Sandalore**: 3% 5. **Fractionated Coconut Oil**: 2% 6. **Mild Preserve Eco**: 1% 7. Aqua: 60% Mixing Method: 1. Mix **Sulfate Free No Tear Shampoo Base** and **WaterLock** into water and blend until combined. 2. Gradually pour in **Poly Conditioner Pro 400 m** and continue blending. Some parts started clumping, so I kept blending until the texture became a thick, viscous white cream. 3. Then, pour in **Sandalore** and **Fractionated Coconut Oil** and continue blending. 4. The resulting shampoo texture was a very thick white cream, similar to a hair mask. 5. I gradually added more water, blending slowly, until it loosened up. The cream texture became slippery but had no foam, similar to a hair conditioner (total water added was 40 ml). 6. The shampoo volume went from 300 ml to 400 ml. I haven't added the preservative yet, as I just ordered it. I left the ingredients outside for a day before making it, but then quickly proceeded. How can I fix this to achieve cleaning performance similar to adult shampoo, with a texture like Amway's green conditioning shampoo (slightly more liquid)?

Cosmetics Shampoo Sulfate-Free Formulation Texture Foaming Conditioning
Posted by novasken
Read More

Could you please review the ingredient compatibility for my DIY facial cream formulation? I want the cream to help strengthen the skin, provide moisture, reduce acne, brighten the skin, and reduce skin yellowness. Here is my proposed formulation: **Part A (Hot Process 50°C)** * Water: 10% * Sodium Lactate Plus: 3% * Ectoine: 1% **Part B (Hot Process 50°C)** * Sensitive Cream Maker: 1% * LipidSoft Lite: 1% * Horse Oil: 2% **Part C** * Remaining Water: % * Repair Activator: 10% * Plankton Artemia Extract: 2% * Ume Extract: 2% * 20nm Silver Pure: 1% * Licochalcone A 20%: 0.5% * Sym-White: 0.5% **Part D** * Aquamax: 3% (Thickener) **Part E** * Preservative: 0.7%

Cosmetics DIY Formulation Cream Compatibility Skin Brightening Skin Health
Posted by qgraceworld
Read More

Please review the compatibility of the ingredients in the following homemade face cream formulation, which aims to tighten skin, reduce wrinkles, provide moisture, and whiten skin. **Formulation:** **Part A (Hot Process 50°C)** * Water 10% * Sodium Lactate Plus 3% **Part B (Hot Process 50°C)** * Sensitive Cream Maker 1% * LipidSoft Lite 1% * Pure-Baicalin 0.3% **Part C** * Remaining Water % * Methylsilanol Mannuronate 3% * Palmaria Palmata Extract 3% * Glycosaminoglycans Complex 2% * Wrinkle-Fill 2% * CeraTouch 1% * HydroAlgae 1% * Sym-White 1% **Part D** * Encapsulated Salicylic Acid 3% **Part E** * Aquamax 3% (Thickener) **Part F** * Preservative 0.7%

Cosmetics Cream Custom Formulation Compatibility Stability Wrinkle Reduction
Posted by qgraceworld
Read More

I need help checking the compatibility of ingredients for a DIY all-in-one lotion. The lotion is intended to help with skin tightening, cellulite reduction, moisturizing, skin brightening, reducing skin yellowness, and treating clogged pores on the back. Here is the proposed formulation and procedure: **Part A (Hot Process 50°C)** * Water: 10% * Sodium Lactate Plus: 5% **Part B (Hot Process 50°C)** * Lipoluxe: 1% (Emulsifier) * Horse Oil: 15% * Lipid Soft Lite: 1.5% * Pure Baicalin: 0.5% **Part C** * Water: Remaining % * Methylsilanol: 5% * Palmaria: 4% * Ume: 4% * Hydroalgae: 1.5% * Wrinkle: 2% * Sym-White: 1% * Allantoin: 1% **Part D** * Encapsulated Salicylic Acid: 3% **Part E** * Aquamax: 5% (Thickener) **Part F** * Preservative: 0.7% **Part G** * Fragrance: 2% Please advise on the compatibility and potential issues with this formulation and procedure.

Cosmetics Lotion Compatibility Cosmetic Formulation Cellulite Reduction Acne Treatment
Posted by qgraceworld
Read More

I would like to know if mixing `200 proof alcohol` with `cosmetic grade glitter` will cause the plastic in the glitter to dissolve. Also, is it dangerous? Thank you.

Cosmetics Solubility Safety Cosmetic Application Flammability Glitter
Posted by baspc1
Read More

I have questions about the Bescents C (citrus) and Bescents I (iris) fragrances from the SCENT > Fragrance category: * Are these fragrances 100% fragrance oil, or do they contain alcohol or other oils? * Can these fragrances be diluted with Carrier Oil (such as Fractionated Coconut Oil or Sweet Almond Oil) instead of alcohol? Will they separate or mix well? * Besides Iris, does the Bescents I (iris) fragrance contain other ingredients?

Cosmetics Fragrance Oil Compatibility Dilution Ingredient Declaration Purity
Posted by nasreew
Read More

I would like a toner formulation that focuses on: * Pore tightening * Skin brightening * Hydration * Acne reduction The formulation should be suitable for sensitive skin and include the ingredients DMAE and BHA. I have attached a file and would like to know what additional ingredients are needed and their appropriate percentages.

Cosmetics Toner Sensitive Skin Pore Reduction Acne Treatment Skin Brightening
Posted by porapitchy
Read More

How can I make natural massage oil last longer and prevent it from going rancid when using natural oils?

Cosmetics Massage Oil Rancidity Shelf Life Antioxidant Storage Conditions
Posted by parichartwassati
Read More

What are the differences between Rose Hip Oil (Virgin, Fresh) and Rose Hip Oil (Extra Virgin)?

Cosmetics Oil Ingredient Comparison Hydration Anti-aging Scar Treatment
Posted by whalelanding
Read More

Based on the provided ingredients: * Argan Oil (Organic - Virgin - Deodorized) * Bakuchiol (Natural Retinol) * Dimethyl Isosorbide (DMI) I have some questions about using these three ingredients: 1. Do I need to add a preservative? If so, which one do you recommend? 2. How long can the mixture be stored after mixing? 3. Can I mix them by putting them in a bottle and shaking? How long does it take to mix these three ingredients using this method? 4. Will there be any odor (rancidity, specific odor)? Can I add fragrance?

Cosmetics Serum Stability Preservation Mixing Procedure Odor
Posted by whalelanding
Read More

My skin is easily irritated, acne-prone, oily but dehydrated, weak, turns red when exposed to sunlight, and has red spots on the surface. - Can the following formula be mixed for a facial spray to be used throughout the day? - I want it to be effective in helping to reduce oiliness, balance the skin, and protect the skin from pollution. Here is the proposed formula: * Water 88% * Niacinamide 3% * Licorice Extract (Licochalcone A 1%) 1% * Ectoin 2% * Prebiotic 3% * Beta Glucan 3%

Cosmetics Spray Sensitive Skin Acne-prone Skin Oil Control Anti-Pollution
Posted by luangwiphu.p
Read More

Could you please analyze the ingredient list for a foundation? The list is as follows: Water, Cyclopentasiloxane, Trimethylsiloxysilicate, PEG/PPG-18/18 Dimethicone, Butylene Glycol, Tribehenin, Polyglyceryl-3 Diisostearate, Magnesium Sulfate, Tocopheryl Acetate, Polymethylsilsesquioxane, Methicone, Laureth-7, Xanthan Gum, Alumina, Sodium Dehydroacetate, Disteardimonium Hectorite, Cellulose Gum, Propylene Carbonate, Pentaerythrityl Tetra-Di-Butyl Hydroxyhydrocinnamate, Phenoxyethanol. May Contain: Iron Oxides, Mica, Titanium Dioxide. Thank you.

Cosmetics Foundation Cosmetic Formulation Ingredient Analysis Long-lasting Texture
Posted by touchzhakornxx
Read More

Could you please provide the mixing steps for the Aloe Vera + Vitamin gel formula listed on MySkinRecipes? The formula is as follows: 1. Aloe Vera Extract 3% 2. VitaminB5 3% 3. VitaminB3 3% 4. AnyGel 1% 5. Mild Preserve Eco 1% 6. water 73% I have already ordered the ingredients and have two questions: 1. Is the listed water percentage (73%) correct? 2. What are the mixing steps? I read that AnyGel must be mixed with water first to form a gel, and then other ingredients and the preservative are added last. Is this correct? How does this differ from Pro Polymer? Would using Pro Polymer be easier for a beginner?

Cosmetics Gel Mixing Procedure Ingredient Ratio Gelling Agent Ingredient Comparison
Posted by popang19
Read More

Evaluate the following two gel formulas for usability and ingredient compatibility: * **Formula 1: Hydrating Gel** * Hyaluronic Acid (Japan) 1% * Safe-B3™ (Vitamin B3, Niacinamide) 10% * GlucoBright™ (Acetyl glucosamine) 5% * Any Gel™ 1% * Global Guard™ 1% * Water 82% * **Formula 2: AHA Gel** * Glycolic Acid (AHA) 100% Powder 10% * Calendula Extract (Water Soluble) 5% * Any Gel™ 1% * Global Guard™ 1% * Water 83%

Cosmetics Gel Ingredient Interaction pH Suitability Hydration Exfoliation
Posted by jirawat.guy.rongtong
Read More

Is Shea Butter (Ultra Soft) back in stock?

Cosmetics Product Availability Raw Material Hydration Wrinkle Reduction Texture
Posted by bungond
Read More

Can I mix Alpha Arbutin powder directly into ready-made body lotion? For example, lotions like Nivea, Citra, Vaseline, and other types of lotions, at a concentration of 2%. Can I just mix it in and apply it to my body immediately? The purpose is to achieve an even skin tone all over the body, as my skin is very darkened by the sun. Any other recommendations are welcome. Thank you very much.

Cosmetics Skin Brightening Stability pH Suitability Lotion Solubility
Posted by mew.jaa.mm
Read More

Based on the available products, are there colors for mixing with Perfume? If so, how are they used?

Cosmetics Perfume Coloring Solubility Solvents Alcohol Formulation
Posted by baspc1
Read More

I am 45 years old and my face is starting to lose firmness, especially the under-eye area which has dark circles and puffiness. I have two questions: * If I buy REGU®-AGE 3 ml., can I mix it into the eye cream I am currently using? * If I buy ingredients for eyelash growth, can I mix them into Fractionated Coconut Oil and use it directly? Please advise.

Cosmetics Eye Care Cream Oil Finished Product Ingredient Interaction
Posted by a_sirada
Read More

When making a gel with Carbopol and adding Fragrance, the gel becomes cloudy. Is there a way to fix this?

Cosmetics Gel Turbidity Solubilizer Dispersion Water-based Formulation
Posted by changkaow
Read More

Regarding the preservative Phenoxyethanol: 1. How many years does it help the product last? 2. If added to a gel formulation, will it make the gel cloudy?

Cosmetics Gel Preservation Clarity Challenge Test Stability
Posted by changkaow
Read More